740410
16
Zoom out
Zoom in
Previous page
1/20
Next page
FACTORY RESET: Restores all settings to the factory default
values.
REFRESH NETWORK: Clears discovered stereos from the
device and searches for new stereos on the network.
Additional Stereo Control Options
Connecting to a Garmin Watch
For a list of a compatible Garmin watches, go to
www.fusionentertainment.com.
For more information about the watch, see the watch manual at
www.garmin.com/manuals.
1
Following the instructions in the watch manual, install the
Fusion-Link Lite
app from the Connect IQ
store onto the
watch.
2
On the stereo, select the BT source.
3
Select > DISCOVERABLE.
The stereo remains discoverable for two minutes.
4
Bring the watch within 3 m (10 ft.) of the stereo.
NOTE: Stay 10 m (33 ft.) away from other ANT
®
devices
while pairing.
5
Open the Fusion-Link Lite app on the watch.
The first time you open the app on the watch, the watch
automatically pairs with and connects to the stereo. If you
need to pair to another stereo, in the Fusion-Link Lite app,
select Settings > Pair new.
6
Control the audio playback using the Fusion-Link Lite app on
the watch.
After the devices are paired, they connect automatically when
they are turned on, within range, and the app is open on the
watch.
Connecting to an ARX70 Remote Control
1
On the stereo, select the BT source.
2
Select > DISCOVERABLE.
TIP: You can also press the button on the stereo to make it
discoverable.
3
Bring the ARX70 remote control within 10 m (33 ft.) of the
stereo.
NOTE: Stay 10 m (33 ft.) away from other ANT devices while
pairing.
4
On the ARX70 remote control, press and hold until the
status LED starts alternating green and red.
The remote control searches for the stereo. When the remote
control pairs successfully, the status LED turns on green
briefly and then turns off.
If the remote control cannot find the stereo, the status LED turns
on red briefly and then turns off.
Fusion-Link Wireless Remote Control App
You can use the Fusion-Link remote control app on your
compatible Apple or Android device to adjust the stereo volume,
change the source, control playback, select and manage radio
presets, and adjust some stereo settings.You can use the app to
set up and configure DSP profiles on the stereo.You can use the
app to update the stereo software.
The app communicates with the stereo using a wireless
connection to the mobile device. You must connect your
compatible device to the stereo using Bluetooth technology to
use the app.
If the stereo is connected to a network with a WiFi
®
access
point, the app can communicate with the stereo using the
network for greater range than a Bluetooth connection.
NOTE: You cannot update the stereo software using a Bluetooth
connection. You must connect the app using a WiFi connection
to update the stereo software wirelessly.
You can connect an Apple device to the stereo using a USB
cable to update the stereo software.
For information about the Fusion-Link remote control app for
compatible Apple or Android devices, go to the Apple App
Store
SM
or the Google Play
store.
FUSION-Link
Network Technology
FUSION-Link network technology allows you to fully control
compatible Fusion entertainment systems on compatible multi-
function displays installed at the helm, flybridge, or navigation
station of the vessel. This provides integrated entertainment
control and a less cluttered console.
The partnered multi-function display becomes the portal on
which you can control all audio on the vessel, no matter where
on the vessel the connected stereo is installed. The FUSION-
Link equipped stereo can be installed out of sight if space is an
issue and users need to access the stereo only to replace
removable media.
FUSION-Link technology on this device can communicate using
existing industry-standard network connections including
Ethernet and WiFi wireless technology.
FUSION-Link technology offered on this device can
communicate using existing industry-standard NMEA 2000
networks.
For a list of FUSION-Link capable products from companies
partnered with Fusion, go to www.fusionentertainment.com.
NMEA 2000 Information
NMEA 2000 is the most popular marine standard for data
communication within vessels. It has become the standard for
sending navigation and engine management data within
vessels. Fusion introduces an industry-first product by
incorporating NMEA 2000 functionality in its audio remote
control devices. This enables the user to monitor a series of
NMEA
®
sentences available over the NMEA 2000 network on a
connected remote control.
Go to www.fusionentertainment.com for a full list of supported
NMEA sentences.
Appendix
Registering Your Fusion Device
Help us better support you by completing our online registration
today.
Go to www.fusionentertainment.com.
Keep the original sales receipt, or a photocopy, in a safe
place.
Cleaning the Device
1
Dampen a soft, clean, lint-free cloth with fresh water.
2
Gently wipe the device.
Software Updates
For best results, you should update the software in all Fusion
devices at the time of installation to ensure compatibility.
You can update the software using a USB flash drive not
formatted to the NTFS file system. For software updates and
instructions on updating the device using the USB flash drive, go
to the device product page at www.fusionentertainment.com
/marine.
If the stereo is connected to a Fusion PartyBus network with a
WiFi router, you can also update the software using the Fusion-
12 Additional Stereo Control Options
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fusion Apollo MS-WB670 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fusion Apollo MS-WB670 in the language / languages: English as an attachment in your email.

The manual is 1,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fusion Apollo MS-WB670

Fusion Apollo MS-WB670 Installation Guide - English - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info