Manual Fusion Apollo MS-WB670 (page 14 of 20) (English)

740410

Zoom out

Zoom in

1/20

ZONE: Enables you to configure the speaker zones (Speaker

Zone Settings, page 10).

BRIGHTNESS: Adjusts the screen and dial backlight

brightness .

TUNER REGION: Sets the region used by the FM, AM, DAB,

and SiriusXM sources.

LANGUAGE: Sets the language on the device.

DEVICE NAME: Sets a name for this stereo.

TELEMUTE: Sets the behavior of the mute function when the

device is connected to a hands-free mobile phone. When a

call is received, the device can either mute the audio or

broadcast the call through the Aux input. See your hands-free

kit instructions.

SEARCHING: Enables Fusion Alpha Search Technology

(FAST), which allows you to quickly search for tracks by letter

or number. You can select a number to enable the FAST

menu if your music device contains more than the selected

number of items.

AirPlay PASSWORD: Sets a password that a user must enter

when connecting to the stereo using the AirPlay feature

(Setting an AirPlay Password, page 5).

POWER OPTIONS: Adjusts power settings, such as the power-

save mode (Power Options, page 11).

SOURCE: Allows you to enable sources, enable the Fusion

PartyBus network for some sources, and name the sources.

You may want to disable streaming for some sources, such

as AM, because streaming over the Fusion PartyBus network

introduces a small audio lag that is not desirable in some

situations.

NETWORK: Enables you to configure the Fusion PartyBus

network settings (Network Settings, page 11).

UPDATE: Updates the stereo or connected devices (Update

Options, page 11).

ABOUT: Shows the software version information for the stereo.

Speaker Zone Settings

Disabling the Internal Amplifiers

If you do not connect speakers directly to zones 1 and 2, you

can disable the internal amplifiers to reduce power consumption.

Select > SETTINGS.

Select the name of this stereo.

Select ZONE.

Select INTERNAL AMP ON to clear the check box.

Disabling a Zone

You can disable an unused zone and remove it from the audio

level pages. When a zone is disabled, you cannot change any of

the settings for that zone. You cannot disable zone 1.

Select > SETTINGS.

Select the name of this stereo.

Select ZONE.

Select a zone.

Select ZONE ENABLED to clear the check box.

Enabling Volume Control of Zone 3 from a Connected

Amplifier

By default, the volume of zone 3 is controlled by the stereo, but

you can control the volume of the zone using the connected

amplifier instead.

Select > SETTINGS.

Select the name of this stereo.

Select zone 3.

Select VOLUME CONTROL to clear the check box.

The audio signal from the zone is provided to the amplifier as a

fixed-line-level output at maximum volume.

Linking Zones

You can link zones 1 and 2 to keep the volume levels

synchronized. Adjusting the volume of either of the linked zones

affects both zones.

Select > SETTINGS.

Select the name of this stereo.

Select ZONE > ZONE 2 > LINK TO ZONE 1.

NOTE: After zones 1 and 2 are linked, you cannot adjust the

volume of each zone individually.

Disabling the Loud Setting for a Zone

The LOUD setting maintains frequency response at low volumes

and increases perceived loudness at high volumes. This setting

is enabled by default in all zones.

Select > SETTINGS.

Select the name of this stereo.

Select ZONE.

Select a zone.

Select LOUD to clear the check box.

Adjusting the Tone

Select > SETTINGS.

Select the name of this device

Select ZONE.

Select the zone to adjust.

Select TONE.

Press the dial to select to a tone.

Turn the dial to adjust the level.

Setting a Zone Name

You can set a name for a speaker zone to make it easier to

identify.

Select > SETTINGS.

Select the name of this stereo.

Select ZONE.

Select a zone.

Select ZONE NAME.

Use the on-screen keyboard to enter a name, and select .

Adjusting the Subwoofer Filter

You can use the subwoofer filter setting to control the subwoofer

cutoff frequency for each zone, which can enhance the blend of

the sound produced by the speakers and the subwoofer. Audio

signals above the selected frequency are not passed to the

subwoofer.

NOTE: If a DSP setting has been applied to zone, this setting

cannot be changed on the stereo. You can view the DSP setting

for the optimal cutoff frequency as calculated by the DSP

controller, but cannot adjust it.

Select > SETTINGS.

Select the name of this stereo.

Select ZONE.

Select a zone.

Select SUB. FREQ..

Select a frequency.

Adjusting Additional Audio Settings for a Zone

Select > SETTINGS.

Select the name of this device.

Select ZONE.

10 General Settings

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fusion Apollo MS-WB670 in the language / languages: English as an attachment in your email.

The manual is 1,55 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fusion Apollo MS-WB670

Fusion Apollo MS-WB670 Installation Guide - English - 6 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fusion Apollo MS-WB670 Manual

Product: