648605
24
Zoom out
Zoom in
Previous page
1/62
Next page
Doc. P/N: WSP-009-004
Version: V1.3
Issue Date: August 2013
www.wassp.com
Page 24 of 62
Operator Manual
4.8.5 Sensor Values Tab
The Sensor Values tab provides a selection of motion compensation options and corrections
for sensor misalignment. These settings should not be changed by the operator outside of the
commissioning process.
Figure 19. Ship Setup Options – Sensor Values Tab
The values under Current Values are the selected live motion readings from the NMEA sensors
that the WASSP system is connected to and reading from (with offsets applied).
If roll correction is enabled and congured correctly and the vessel is rolling less than 15°, the
sonar picture should remain on almost the same angle from ping to ping on atish ground.
If the sonar picture rocks as the vessel rolls then the roll compensation setting is likely to be
wrong or the motion sensor is not being read by the WASSP system. Refer to Installation
Manual “10.2.8 Sea Trial - Commissioning Step 15 : Pitch and Heading (Optional)” on page
57.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno WMB-3250 Wassp at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno WMB-3250 Wassp in the language / languages: English as an attachment in your email.

The manual is 10,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info