675835

Furuno RO4700 MarineRadio (Engels) Manual

15
Zoom out
Zoom in
Previous page
1/22
Next page
Page 29 Page 30
3 The call data is stored in the call log
5.3.5 RECEIVING A GROUP CALL
1 When a group Call is received, the Alarm Tone Sounds, the
radio automatically tune to the designated Channel, and Press
any key to disable the alarm.
2 Monitor the traffic channel for an announcement from the
calling ship.
3 The call data is stored in the CALL LOG
5.3.6 RECEIVING AN INDIVIDUAL CALL
1 When an Individual call is received, the Alarm Tone Sounds
The radio automatically tunes to the channel designated in the
DSC signal,
2 The MMSI contained within the signal are displayed on the
Text Area of the display. If the MMSI correlates to an MMSI
stored in the Buddy List, the corresponding name is displayed
in place of the MMSI.
3 The DSC signal data is stored in the Call Log.
5.3.7 RECEIVING AN “POSITION RELAY” CALL
1 When “Position Reply” received, the Alert tone sound and the
“POS Received” message on 1
st
line and display the sender
GPS data.
2 The time & position could not be stored but able to output to
the NMEA port for external Chart-plotter.
3 Last Rx call information is stored in the position of menu “LAST
RX”
5.3.8 RECEIVING A GEOGRAPHIC AREA CALL
A GEOGRAPHIC AREA CALL are received by vessels by
within a specific geographical boundary area.
1 When you receive notification of a geographical call, press any
key to cancel the alert. The radio automatically selects the
channel designated in the incoming call. The time and the user
MMSI are displayed on the screen and the call data is stored in
the call log
2 Monitor the working channel for an announcement from the
calling vessel.
6 SETUP MENU
6.1 MENU FUNCTION DESCRIPTION
The radio’s setup functions are accessed through the Menu mode.
Menu mode selections are as follows.
Item Description
BUDDY LIST Selects the BUDDY List Entry routine to enter Names and
MMSI's for frequently called DSC stations. Up to 20 names
could be stored.
BACKLIGHT set the backlight level, total 8 level be available.
CONTRAST Selects display contrast setting: 1-8 levels.
GPS/TIME Set the Position info if no GPS attached and define the display
POS and Time format, Offset and COG/SOG display settings.
RADIO SETUP There are 4 items that user can customize – CH Name, Ring
Tone Volume, Beep Volume and Internal Speaker on/off.
DSC SETUP There are 5 functions that allow user to alter – User MMSI
entry, Group MMSI entry, Individual Reply, DSC enable , and
POS reply
RESET Recall ex-factory setting
6.2 Set-Up Menu Navigation
To access the Menu Mode:
Press and hold MENU/DSC key, Text area displays the Set-Up Menu
list.
To exit the Menu mode or sub –mode:
GRP ROUTINE
FINISHER
FROM
ID987654322
ALL SHIP
URGENCY
ID987654322
ALL SHIP
SAFETY
ID987654322
or
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno RO4700 MarineRadio (Engels) at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno RO4700 MarineRadio (Engels) in the language / languages: English as an attachment in your email.

The manual is 1,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info