675835
14
Zoom out
Zoom in
Previous page
1/22
Next page
Page 27 Page 28
POS REPLY either can manually send your position
information or do it automatic which depending upon on your ‘s
setting.
If set on the manual reply, operation procedures as follow:
1 when you received POS request call, An alarm (pi-pi) sounds,
LCD displays as follow:
2 Press the CH key to transmit your own ships’ position and time
information
3 Press [CANCEL]t to record the received information, then the
screen goes back to default.
5.3. Receiving a DSC Call
When a DSC call is received, the radio automatically responds
based on the type of call. The information displayed on the
LCD varies depending upon the call type. See chart below.
5.3.1 Receiving Distress Call
1 When a distress call is received, the radio automatically tunes
to channel 16, and the Distress Alarm Tone sounds. The call
data is stored in the distress. Log. Pressing any key disables
the alarm.
3 When position data is included within the signal, it is displayed
in the Text Area of the LCD. When no position data is included
within the signal, the message "--º--, ---X, ---º--, ----Y,
--:--" is displayed in the Text Area of the LCD.
2 You must continue to monitor channel 16 as a coast station
may require assistance in any rescue attempt
5.3.2 Receiving a Distress ACK Send from a coast station
1 When a Distress Relay Call is received, the Base Station
automatically tunes to Channel 16, and the Distress Alarm
Tone sounds. Pressing any key disables the alarm.
When position data is included within the signal, it is displayed
in the Text Area of the LCD. The call data is stored in the
distress log
2 You must continue to monitor channel 16 as a coast station
may require assistance in any rescue attempt
5.3.3 Receiving a Distress Relay Call
1 When a Distress Relay Call is received, the Base Station
automatically tunes to Channel 16, and the Distress Alarm
Tone sounds. Press any key disables the alarm. The call data
is stored in the distress log
When position data is included within the signal, it is displayed
in the Text Area of the LCD.
2 You must continue to monitor channel 16 as a coast station
may require assistance in any rescue attempt
5.3.4 RECEIVING AN ALL SHIPS CALL
1 When an All Ships Call is received, the Alarm Tone Sounds,
the radio automatically tune to the designated Channel, and
press any key to disable the alarm.
2 You must continue to monitor the channel so as to receiver the
voice communication.
DISTRESS
ID450078964
21’09. 1011 N
120’20. 0111 E
DISTRESS
ID450078964
SINKING
12: 45 UTC
RCV:DISTR RLY
ID987654321
SINKING
12: 45UTC
RCV:DISTRRLY
ID987654321
21’09.1011N
120’20.0111E
DISTRES ACK
ID008453217
21’09. 1011 N
120’20. 0111 E
DISTRES ACK
ID008453217
SINKING
12:45 UTC
POS REQUEST
FROM
ID 450878967
12:22 UTC
PRESS ENTER
TO SEND
OR CANCEL
TO DECLINE
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno RO4700 MarineRadio (Engels) at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno RO4700 MarineRadio (Engels) in the language / languages: English as an attachment in your email.

The manual is 1,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info