675835

Furuno RO4700 MarineRadio (Engels) Manual

13
Zoom out
Zoom in
Previous page
1/22
Next page
Page 25 Page 26
2. Press the CH knob again access manual enter ID screen, enter the MMSI
number, when MMSI entry is complete, press the CH knob to accept the
selection
3. Then rotate the CH knob to select the working channel and press the CH
knob to accept select.
(Only in the case of a call to a ship, it is permitted to enter a talk channel; a call
to a coast station, the coast station will specify the channel to talk on in its
acknowledgement.)
4. the radio summarizes the call details and ask for confirmation to send the
call (send?).
Press the CH knob again to send the call. Once the call is sent, the Text
area of the display momentarily shows the Calling message., then display a
awaiting acknowledgment.
6 If the call is acknowledged, press PTT to talk
7 If the call does not get with in 16 seconds, the radio prompts you to
resend the call.
5.2.4.2 Sending an Individual Call (MMSI stored in Buddy list)
1. Press DSC /MENU to DSC mode, then select “NEW CALL”. Press the CH
knob, the arrow is pointing to <MANUAL>
2. Rotate the CH knob select the person of the Buddy list that you want to call.
the operation procedures are as same as the manual sent an individual call.
5.2.4.3 ACKNOWLEDGEMENT OF AN INDIVIDUAL INCOMING CALL
1. If INDIV REPLY switches to MANUAL the radio requires the operator to
manually send an acknowledgement to the requesting radio. Press CH key
to send an acknowledgement or CANCEL key to cancel.
2. If INDIV REPLY switches to AUTOMATIC the radio will automatically send
an acknowledgement to the requesting radio within 10 seconds of receiving
the call.
5.2.5 LAST CALL (RECALL THE MOST RECENT INCOMING CALL)
This facility also is useful and is used frequently as routing individual call
1. Press the DSC / Menu key to enter the DSC mode LAST CALL will be
pointed, press CH key to display the detail information of the last call
2. Select the working channel for individual call and press CH key, The radio
summarizes the call details and ask for confirmation to send the call
3. press CH knob to send the call
5.2.6 SEND an INDIVIDUAL CALL USING THE CALL LOG
The CALL LOG contains the contact details for the 20 most recent
incoming calls, so you call any of them again quickly
1. Press the DSC / Menu key to enter the DSC mode, select CALL LOG,
Press up/down key to scroll for previous call.
2. Press the CH key to conform the choice then follow the as the ways to
make the call in.5.2.4.2
(To save this log entry you BUDDY LIST, select SAVE, then press ENT and
enter a name the logged MMSI is automatically displayed.)
5. 2.7 POS REQUEST AND POS REPLY
5. 2.7.1 POS REQUEST (REQUEST THE LL POSITION OF A BUDDY)
The option enables you to request GPS position information from any
vessel for which an MMSI number is known.
1 Select the POS REQUEST on the DSC Menu, press the CH
key to enter the BUDDY list (<MANUAL> AND BUDDY list)
select the one for position information.
2 The Call will be initiate and same as individual call procedures.
5.2.7.2 POP REPLY
The position relay can to send your position to another radio
with this feature. Your radio must have an operating GPS
receiver connected to be used to send to the position.
450078964
IND ROUTINE
>SEND
CANCEL
450078964
IND ROUTINE
>SELECT CH
PRESS ENTER
450078964
INDIVIDUAL
ROUTINE
AWAITING ACK
RETRANSMIT
IND ROUTINE
>SEND
CANCEL
DISTRESS
21’22.0012N
120º40.1001E
10:15 UTC
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno RO4700 MarineRadio (Engels) at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno RO4700 MarineRadio (Engels) in the language / languages: English as an attachment in your email.

The manual is 1,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info