522136
42
Zoom out
Zoom in
Previous page
1/47
Next page
35
not use an “open” type lug ( ).
Optional equipment
Pin arrangement on NMEA port
Connector Remarks
1 TD-A
2 TD-B
IEC-61162-1/NMEA0183
3 RD-A
4 RD-B
IEC-61162-1/NMEA0183
5 +Vout
6 GND
Power output max. 100 mA*
7 FG
* = The LS-6100 can feed 12 V power to
GP-310B, GP-320B. The power voltage must
be at least 12 V to feed power to those units.
NMEA port setup
The NMEA port can function as an input
port or input/output port. Change the setting
to “In/In” when connecting GP-310B and a
wind sensor.
When connecting the GP-320B and a wind
sensor, first turn on “GPS WAAS” (in the
Installation menu) and then select “In/In” as
the NMEA port setting.
1. Turn on the power while pressing and
holding down the [MENU/ESC] key.
Continue pressing the [MENU/ESC] key
until the Installation menu appears.
2. Choose NMEA PORT, and then press
to display the NMEA port options
window.
3. Use or to choose In/Out or In/In as
appropriate.
In/Out: Input and Output (default
setting)
In/In: Input only (Available with
connection of the GP-310B and a wind
sensor.)
4. Press , choose NMEA MIX, and then
press to display the NMEA MIX
options window.
5. Use or to choose Off or On.
Choose On to output input data.
6. To restore normal operation, turn off the
power and then turn it on again.
Water temp/speed sensor
Connect the optional water temp/speed
sensor to the XDR connector with the
optional converter connector (Type
02S4147) as shown below.
Tape connectors with
vulcaninzing tape
and then vinyl tape
to waterproof them.
Bind tape ends with
cable ties to prevent
tape from unraveling.
Connect to XDR port
at rear of display unit
MJ-A10SPF
MJ-A10SRMDMJ-A6SRMD
From
transducer
From
sensor
Connection of converter
connector 02S4147
GP-320B
DISPLAY UNIT
GPS Receiver GP-320B
GPS Navigator GP-32,etc.
12 VDC
NMEA port setting: IN/OUT
Connection of GP-320B
www.Busse-Yachtshop.de email: info@busse-yachtshop.de
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno LS-6100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno LS-6100 in the language / languages: English as an attachment in your email.

The manual is 1,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info