Manual Furuno FR-2125-B (page 14 of 89) (English)

616299

Zoom out

Zoom in

1/89

1-6

1.2 Processor Unit

1.2.1 Mounting considerations

When selecting a mounting location, keep in mind the following points:

• The processor unit must be mounted horizontally.

• DO NOT place any item on the top of the processor unit.

• Locate the unit out of direct sunlight and away from heat sources because of heat that can

build up inside the cabinet.

• Locate the equipment away from places subject to water splash and rain.

• Be sure the mounting location is strong enough to support the weight of the unit under the

continued vibration which is normally experienced on the ship. If necessary reinforce the

mounting location.

• Determine the mounting location considering the length of the following cables:

a) Signal cable from the antenna unit

b) Power cable from the ship's mains

c) Monitor cable from the monitor

d) Control cable from the control unit

• Leave sufficient space on the sides and rear of the unit to facilitate maintenance. Also, leave a

foot or so of "service loop" in cables behind the unit for servicing ease.

• A magnetic will be adversely affected if placed too close to the processor unit. Observe the

following compass safety distances to prevent deviation of a magnetic compass: Standard

compass, 1.70 m, Steering compass, 0.90 m.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Furuno FR-2125-B in the language / languages: English as an attachment in your email.

The manual is 4,38 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Furuno FR-2125-B Manual

Product: