522181
18
Zoom out
Zoom in
Previous page
1/40
Next page
1. MOUNTING
9
1.6 Optional Triducers
1.6.1 Thru-hull triducer 525STID-MSD
See section 1.4 for how to install the 525STID-MSD.
1.6.2 Transom route triducer 525STID-PWD
Mounting location
To ensure the best performance, the sensor must be submerged in aeration-free and turbulence-
free water. Mount the sensor close to the centerline of the boat. On slower heavier displacement
hulls, positioning it farther from the centerline is acceptable.
Allow adequate space above the bracket for it to release and rotate the sensor upward.
79 mm
(3.1”)
Thread
133 mm
(5.2”)
51 mm
(2.0”)
7mm (0.3”)
140 mm
(5.5”)
27 mm
(1.1”)
Height to the screw
CAUTION
CAUTION
Do not install the triducer in the following
locations:
Near any water drain or vent
Near overhangs, braces, or behind fixtures
Near any unstable area of the ship’s bottom
Near any areas with peeling paint
Do not install the triducer where it can be a
hindrance during any of the following times:
When pulling a trailer
When launching
When being towed
When ship is in drydock
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno BBDS1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno BBDS1 in the language / languages: English as an attachment in your email.

The manual is 3,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info