68173
71
Zoom out
Zoom in
Previous page
1/103
Next page
t
O
Enter the MSN. In this example: »12«.
This MSN must already be assigned as an »internal number« for
yoursystem telephone via the »Professional Configurator«, or as
-
signed now. This MSN is inactive until the same MSN (internal
number) is entered using the »Professional Configurator«.
Program MSN-1
> 12
Log-on
Information:
Thefollowinginputactionsareoptionalandareusedonlyfor systemsecuritytheyarenot necessarilyrequiredfor
proper functioning of the system.
Simple log-in for DHCP is described on Page . If a PIN has already been given under »Allow configuration« and the
»Log-in name« entered under »Subscriber name« in the »Professional Configurator«, you must now also enter this
information for the IP-S400. You must enter the MSN as the name (only digits are permitted). You can do this using
the »Professional Systel-Configurator« or on the system telephone itself. If you enter the »IPS Log-in PIN« in the
systemtelephonefirst,youmustalsoenterthatinformationinthesubsequentconfigurationforthePABXsystem.
Entering the IPS Log-in PIN
Begin as follows:
a
Msss>s
Configura
-
tion
MSN MSN-1...MSN
10
IPS Log-In
PIN
t
O
Enter the phone PIN under »PIN«. Only digits are permitted for
this PIN. In the example shown here (factory setting) »0000«.
Confirm your entry by pressing OK.
Input PIN please
> 0000
Entering the »Sys-Server Log-In PIN for the IPS«
Observe the different designations when entering the PIN:
PINnameintheconfigurationwiththe
systemtelephone:
Log-In PIN.
PINnameintheconfigurationusingthe
»ProfessionalSystel-Configurator«forthesystemtelephone:
Log-in-PIN
PINnameforconfigurationofthesubscriber
the»ProfessionalConfigurator«forthePABXsystem:
PIN
t Enterthe »Log-in PIN«.When you pressthe 0 key several timesin
a row the possible special characters that can be used are display
-
ed, along with their current position on the key panel. Up to 4 le
-
vels are displayed each time you press the 0 key. When you then
press a key 0...9 the character displayed for that particular key is
selected. Wait until the cursor moves forward one field before at
-
tempting to enter the next character. Only the character that is
currently being entered is visible; characters that have already
been entered are hidden by the asterisk symbol.
Example: Press the key 0 one time and then key 6; the @ symbol is
selected.
Please enter
login PIN
MSN-1> *@_
Please enter
login PIN
1=! 2=% 3=?
4= 5=: 6=@
7=, 8=. 9=0
O
E
Confirm your entry by pressing OK.
Press the
E
button.
Setting up the IP-S400 Configuration
67
71


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Funkwerk CS410 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Funkwerk CS410 in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info