68173
69
Zoom out
Zoom in
Previous page
1/103
Next page
Information:
Youcanonlymakefurthersettings(e.g.callsignalingmelody,volume,name)ifthenumberhasalreadybeenprevi
-
ously configured.
Setting the melody and the volume
You can define and set a specific melody and its volume for each MSN or extension number that you enter. If you are
usingthe telephone at aninternal ISDN connection of certain elmeg PABX systems, you canprogram special ringing
melodies and a different volume for internal calls.
Inthe initial setting of the telephone, 10 different melodies arestored for call signaling. These 10 melodies can not be
changed.Youcan import afurther 10 melodies into yourphone via aPC. Using the SoundManager supplied withthe
WIN-Tools CD-ROM, you can produce your own tunes on the PC and then load these into the telephone. These
melodies are then stored in your phone as Melody 11 20. Ready-to-use melody profiles for downloading to your
phone are located in the WIN-Tools installation directory.
Information:
If you assign a call signaling melody to a number (MSN) that is not stored in your phone, the first permanently sto
-
red melody in your phone is then used.
Programming a melody (sound)
In the »Program MSN-1« menu press the »Sound« softkey and then the »internal«oexternal« softkey. In this
example: »internal«.
<>
O
Use the arrow buttons to set the desired melody. The bar in the
display indicates the current status.
Confirm your entry by pressing ok.
ˆ Select melody {}
MSN-1,internal 3
−©−−−−−−−−−−
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
Setting the volume
In the »Program MSN-1« menu press the »Volume« softkey and then the »internal« or »external« softkey.
<>
O
Use the arrow buttons to set the volume and the ringer melody.
The bar in the display indicates the current status.
Confirm your entry by pressing ok.
Select call signal {}
MSN-1
- ©©©−− +
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
Inadditiontosteady volumes, you can also configurecallsignalingwith an increasing volume.Whenthisisdone, the
volume of the ringing tone is increased automatically as the call is signaled. When the increasing volume function is
configured the following symbol is shown in the display »©©©©©©«
Entering a name for an extension number
You can assign your own names (max. 8 characters) to the MSN extension numbers.
Oneach of the buttonson the push-buttonset there are three or four letters of the alphabet. You canadvancethrough
the letters by pressing the appropriate button repeatedly (see page 12). If there are two consecutive letters on the
same button of the push-buttonset, press the right arrow button after entering the first letter and then enter the next
letter.
Display Configuration
65
69


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Funkwerk CS410 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Funkwerk CS410 in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info