68173
72
Zoom out
Zoom in
Previous page
1/103
Next page
·
Synchronizing of telephone and PABX system.
Information:
Please note that logging in and synchronization may take several moments!
Information:
If there is no connection to the PABX system (no LAN link, or the telephone has not been logged in, »©-----/
/---‰ « will be shown in the display instead of the time.
Configuring the IP-S400 without DHCP
Simple logging in under DHCP is explained on Page . If you have different settings in your PABX system you can
enter that data here. You can call up the data and IP address here for a system telephone logged in under DHCP, or,
you can change these settings if DHCP is de-activated.
Begin as follows:
a
Mss
Configuration TCP/IP settings
s Press the appropriate softkey. Main TCP/IP and
Network settings
Sys-Server
DHCP Server
Gateway
Own IP-address
Netmask
s Sys Server:
If the elmeg PABX system gateway serves simultaneous-
ly as the system server you do not need to input any data
here. If this is not the case you must click the Softkey
»No« and then enter the system server IP address here.
Gateway IP address when connecting directly to the el-
meg PABX system.
Act gateway as Sys
server too (IP) ?
No
ok
s DHCP Server:
Here, you can select whether your system telephone is to
be assigned its IP address automatically from the system
On«), or whether you wish to configure this feature on
your own (»Off«).
Use automatic IP
address setting ?
Off
On
s Gateway:
If »DHCP« is not activated you must enter the network IP
address here in which your system telephone is located.
IP address of
gateway
INA>192.168.1.250!
s IP address:
If you have selected »Off« under »DHCP«, you must enter
the IP address for the telephone as given by the PABX
system or by the network in which the system telephone
is located.
Own IP address (IPS-
Phone)
INA>192.168.1.51
Configuration Setting up the IP-S400
68
72


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Funkwerk CS410 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Funkwerk CS410 in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info