68173
20
Zoom out
Zoom in
Previous page
1/103
Next page
a
s
t
O<>O
bg
Tel.
drctry
Enter first
letter
Select
entry
For information on how to program and configure the telephone directory, please refer to page 26 of these operating
instructions.
Dialing from the VIP memory
You can program VIP numbers for each of the ten dial buttons 1 … 0 including a name (20 characters max.) and a
telephone number (26 digits max.).
a
s<>
or
tbg
VIP
Select VIP
destination
Select VIP
destination
For information on how to program VIP entries, please refer to page 28 of these operating instructions.
Direct dial-in using function keys
Direct dialing is initiated using the direct dialing keys. Each of the five keys can be programmed with two functions
or direct dialing numbers.
a
Z
bg
Press the function key
Use the function keys to select the desired number.
Ifyou wish to dial a numberfrom thesecond level, press the corresponding key two times. This mustbe executed ata
short interval.
You can program the direct dialing / function keys via the PC configuration program for the telephone or during
extended configuration.
from Dialing from the caller/memo list
The phone has a combined caller and memo list. A maximum of 30 entries (calls, memos, SMS messages or UUS1-
messages) are stored in this list. Entries in the caller or memo list are indicated by the »Caller list« softkey.
a
s<>
bg
Caller list
Select entry
For more information about the caller/memo list, please refer to page 29 of these operating instructions.
Accepting / rejecting a call
In its initial state the telephone will accept all calls, regardless of the selected MSN. If two calls are signaled
simultaneously the first one is accepted when you lift up the handset. The second call can still be signaledy a call
waiting signal.
The telephone display shows the caller’s number or the number the caller has dialed (MSN-1 MSN-10, or the
assigned name).
albg
If you are unable, or do not wish to accept a call, you have the option of rejecting this call. Pressthe »reject«softkey
and the call will be no longer be signaled at your telephone.
If you are a member of a team, then this call will continue to be signaled at the phones of your team. If the call was
signaled only at your phone, the caller will hear the busy signal when the call is rejected.
al
s
reject
Making Calls Accepting / rejecting a call
16
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Funkwerk CS410 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Funkwerk CS410 in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info