68173

Funkwerk CS410 Manual

19
Zoom out
Zoom in
Previous page
1/103
Next page
Starting a call
Dial number - no correction possible
btg
Dial number
Dial call number - correction possible
atbg
Dial number
To change the number or to correct a wrong entry, select the wrong figure with the arrow buttons and press C to
delete it. Now enter the correct number.
Ifyouwishtoconductthecall usingthe handset, justlift it upafterdialingthe number. Anytimeduringacall you can
switch back and forth between hands-free calling, speaker function and use of the handset.
After you have dialed the number you can also press the speakerecall flash button to have the number dialed and to
use hands-free calling.
If a call can not be put through (e. g. number is inhibited via the dial ranges control, or the account for the
number/MSN is empty), a corresponding message will appear in the display. e.g.:»Inhibit. : dial number«,
when the dialing filter is active.
When you lift the handset and there is still no connection set up, you can pick up a waiting call using the softkey
»pick up« without replacing the handset again. You are notified of the call in advance by a brief message. When you
configure a connection key or a macro key you can pick up a call immediately just by pressing that key.
Other options for dialing without lifting the handset
Theoptionofdialingwithoutlifting the handset andof correcting or adding to a numberalsoexistsduringdialing:
·
from the last number redialing memory (see page 17).
·
from the caller/ memo list (see page 29).
·
from the telephone directory (see page 26).
·
from the VIP memory (see page 28).
·
with the function keys (see page 53).
·
via CTI (TAPI) features (see page 78).
If you are using one of these options, you can make further entries prior to initiating the call. You can define which
number(MSN),ifany,istobetransmittedtotheparty being called. YoucanusetheProfessionalSystel-Configurator
to set which function is to be assigned directly to the softkey »Telephone directory«: »Local« or »PABX«. You can
reach the second function by pressing the R (Recall flash) key.
Dialing from the pabx telephone directory
When you use this telephone with a system telephony supporting pabx system, you can dial from the telephone
directory of the pabx.
a
Rs
t
O<>O
bg
Tel.
drctry
Enter first
letter
Select
entry
Dialing from the telephone directory
You can store up to 250 names and numbers in the telephone directory. To select a name, you can page through the
directory using the arrow buttons, or enter the specific first letter(s) of the name using the push-button set.
Starting a call Making Calls
15
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Funkwerk CS410 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Funkwerk CS410 in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info