68173
18
Zoom out
Zoom in
Previous page
1/103
Next page
Call signaling
Call signaling is effected using the ringing tone that has been set for the dialed number (MSN) in each telephone.
If you are using the telephone at an internal ISDN connection of certain elmeg PABX systems, you can program
special ringing melodies for internal and external calls.
Function keys and LEDs
You can program the five function keys on two levels with different functions via the PC configuration program for
thetelephone. Eachkey is equipped withanLED that is usedtodisplay the activefunction. Eachcoloris assigned to a
particular level for the function key. (level 1 - red / level 2 - yellow).
Press the key two times to reach the second level for the function keys. This must be done at a short interval.
LED call signaling and answering machine
flashesred: Incomingcalls
lityellow: Answeringmachineswitchedon
flashesyellow: Newmessagesrecordedbytheansweringmachine
Acknowledegement signals
Entries or settings you make at your telephone are sometimes confirmed by acknowledgement signals.
Positive acknowledgement signal (1 long tone):
The positive acknowledgement signal indicates that your input has been accepted and stored by the telephone.
Negative acknowledgement signal (3 short beeps):
Youwillhearthenegativeacknowledgementsignalwhenyourinputhasnotbeenacceptedbythetelephone,orwhen
invalid input has been made.
Displays for programmed features
s When the telephone is in the idle state, additional information
about functions that have been configured are shown on »Info«
line of the display. In this example: »-t-S-R-«.
Press the softkey »Info« if you wish to get more information
about the configured functions.
29.05.06 07:21
Info -T-S-r-
Tel. drctry
Idle
VIP
Caller list
<> If you haveprogrammedseveralfeatures,press the arrowbuttons
to view the various settings.
ªªªªªªªªªªªªªªªªªªªªª
Inhibit/Menu access:
Guard for modification
Displays Configured function
»D«
Active appointment reminder set.
»I«
Dialing control or Call filter active,
Access to telephone menus is protected.
»q«
Function »Silent signalling« (notice tone only) active.
»Q«
Function »Silent signalling« (all calls) active.
(All call signals are switched off)
»U«
Call forwarding active.
»i«
Informationen on programmed function keys
FOR EXAMPLE.: Message enabled / inhibited.
»I«
Informationen through Messages (MWI) For example. auf Ihrer t-Netbox
»%«
Answering machine, time control, notification or remote operation (option module) active.
Description and installation Telephone display and buttons
14
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Funkwerk CS410 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Funkwerk CS410 in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info