560264
20
Zoom out
Zoom in
Previous page
1/83
Next page
STYLISTIC ST6012 MED
2 - English A26391-K279-Z290-1-8N19, edition 1
Information for ensuring electromagnetic compatibility
All data and signal cables must have sufficient shielding. Requirements EN 50173 and
EN 50174-1/2 apply to LAN cabling. Use of unshielded or badly shielded cables may lead to
increased emission of interference and/or reduced fault-tolerance of the device.
All casing covers must be properly secured.
Portable and mobile wireless communications devices such as mobile phones may influence
medical electrical devices. It is imperative that you observe the safety distances given in
table 4.
Protect the contacts of all sockets and plugs of the device against static electricity. Avoid
touching the contacts. Should touching be unavoidable, take the following safety measures:
Touch an earthed object before touching the contacts. This discharges static charges.
or
Wear an earthing strap.
Use only the cables supplied when connecting peripheral devices, such as monitors.
Each peripheral device you want to connect must comply with the requirements for use in an
environment with a medical application.
Install only system expansions that satisfy the requirements and rules governing safety and
electromagnetic compatibility and relating to telecommunications terminal equipment. If you
install other expansions, you may damage the device or violate the safety regulations and
regulations governing RFI suppression.
i
Static electricity, high-speed transients or strong electromagnetic fields on the device can
cause malfunctions. During the malfunction the picture and sound quality, as well as data
communication with USB devices and the fingerprint sensor, may be impaired.
When operating the analogue modem connection, reduced data transfer rates, as well as
aborting of the data transfer or the data connection can result due to the effects of induced
high-frequency fields.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujitsu STYLISTIC ST6012 MED at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujitsu STYLISTIC ST6012 MED in the language / languages: English, German, Dutch, French, Italian, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info