505116

FTE Maximal PVR ST190 CI HDMI Manual

37
Zoom out
Zoom in
Previous page
1/41
Next page
User’s Manual · PVR ST190 CI HDMI
Reserved of technical modifications and/or errors - 37 - PVR ST190 CI HDMI Version en_1.0 FTE maximal
The options you have right with the list are the following ones:
Delete Transponder: The RED key allows you to make a multiple selection of transponders to be deleted. When you
select a TP, it will appear the icon in its column, when you exit of the menu, you will be requested to confirm the
changes.
Edit Transponder: This function with the GREEN key will allow you to vary the parameters of the transponder. You can
change the frequency, polarity, symbol rate and FEC. This last parameter can be changed to AUTO mode in case of
unknowing it.
Add Transponder: Like in the previous step, the YELLOW key, allow adding new TP to the list.
Skip Transponder: In this function, with the BLUE key, allows that one transponder will be keeped in the list but it will be
not tuned.
Whatever change made over the list of transponders will need to be confirmed with OK button when you
exit the menu.
10.4 Channel Search: Satellite
Once the antenna configuration is completed, you should proceed to tune
the channels from the selected satellites. There are different ways to tune the
channels: through LNB, through Satellites and through Transponders.
Searching channels through LNB:
When you select to search channels through LNB, you only can select one
LNB, which corresponds to the programmed tuner, so if you have more than
one LNB installed and configured, you should proceed with one and then the
other to tune all the received channels.
Searching channels through Satellite:
When you search through satellite, you will have several satellite selections,
so you can programme the searching of all the satellites that you have
configured and in one single process you will find all the channels.
To select the satellites, use the Green key, to change the sort of the satellite
list, use the LIST key, confirm your multiple selection by pressing OK key.
Searching channels through Transponder:
Searching through Transponders is the most selective of all the options. It
allows you selecting the frequencies that you are going to tune and search
channels. By default your equipment shows All the transponders and with
the key you can change this option and make a selection of the
transponders that you want to tune. The selection is made with the Green
button and it is validated the multiple selection with the OK key.
In case of adding some new transponder (see point 9.5 transponders
management) you should tune it in this mode.
In whatever selection, you always will have available to find Free To Air
(Free channels), channels with Conditional Access, or All the channels.
… 37 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for FTE Maximal PVR ST190 CI HDMI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of FTE Maximal PVR ST190 CI HDMI in the language / languages: English as an attachment in your email.

The manual is 1,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of FTE Maximal PVR ST190 CI HDMI

FTE Maximal PVR ST190 CI HDMI User Manual - German - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info