505116
36
Zoom out
Zoom in
Previous page
1/41
Next page
User’s Manual · PVR ST190 CI HDMI
Reserved of technical modifications and/or errors - 36 - PVR ST190 CI HDMI Version en_1.0 FTE maximal
10.2 Antenna Configuration
In this menu you should configure the signals that are connected at the
inputs IF IN of your PVR.
By default, the equipment comes with the configuration that you can see in
the Picture with four satellites.
The available options in this screen allow:
Red button: Deletes the selected satellite. It requests for confirmation.
Green button: Edits the selected satellite. The option appears in the following
image.
Yellow button: Adds a satellite. The options appear in the below image.
Antenna Options:
- LNB Type: There are two available bands: C
and Ku. The difference is basically the
transmission frequency. The Ku band has two
possibilities, the most common is the universal
Ku.
- Satellite: Your PVR is provided with several
satellites pre-stored. You can find the one you
want in the list or to add a new one. They are
sorted by its orbital position. With the key
you can access to the available satellite list.
- Low Band / High Band: It is used when the
band selection is Ku one, and it programmes
the Local Oscillators of the LNC.
- DiSEqC 1.0 / 1.1 Ports: To configure the use
of antenna switch. These switches allow the
reception of different satellites in a single input.
- Motor: Enables the function of using a motor to direct the antenna.
- 22 KHz: Tone to switch the band of the LNC.
- LNB Power: Feeding to the LNB. By default the selection is the one for an universal LNB.
- Signal: It shows if there is an available signal in the selected configuration.
Alter whatever change, you should confirm with the OK button when you exit the menu.
10.3 Transponders Management
In the transponders management, we will have a screen like the following one:
With the TV/R they are
shown the TP of the C, Ku
or both bands.
UIT the LIST key you can
change the sort which with
the TP are shown. You can
change the sort of the TP
List, you can sort them by
frequency or by polarity.
With the EPG they are
shown the different pre-
stored satellites and when
you select whatever of
them, it is shown the TP of
this satellite.
Data block of TP where it is
shown the satellite frequency
of transmission, polarity,
symbol rate and FEC. Last
two columns are for the
selection of erasing and skip.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for FTE Maximal PVR ST190 CI HDMI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of FTE Maximal PVR ST190 CI HDMI in the language / languages: English as an attachment in your email.

The manual is 1,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of FTE Maximal PVR ST190 CI HDMI

FTE Maximal PVR ST190 CI HDMI User Manual - German - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info