Manual Friedland HISK1 GlobalGuard Alarm System (page 13 of 78) (English)

535711

Zoom out

Zoom in

1/78

b. Any detectors covering the remainder of the

lower floor apart from the entry/exit points

(zones1&2) should be left with an instant delay

(default for all other zones) for maximum

security.

c. Any detectors placed upstairs (which are not

required when activating Part-Arm-I mode)

should not be setup with Part-Arm I ON.

Typical basic installations:

● Detectors on zones 1 and 2 will have a 30

second entry delay period. Detectors on all

other zones are configured as INSTANT,

(i.e. they have no entry delay).

● The system has a 3 minute alarm duration.

● The Zone Lockout feature is ON so that if

any single zone triggers an alarm more than

3 times they will be ignored until the system

is next disarmed, (this feature helps protect

against continuous false alarms).

● PART-ARM-I is OFF.

● PART-ARM-II is OFF.

IMPORTANT:

As soon as installation is complete

– The default Master User Access PIN Code

for the Control Panel should be changed to

your own code that only you know.

– User Access PIN Codes 1-7 for the Control

Panel should be changed to your own codes

that only the relevant system user knows.

– The system Time and Date must be

configured.

Note: If you wish to change the system

configuration away from the above example and

factory settings and customize it to your own

unique requirements or activate any of the more

advanced system features then refer to the

Programming section from page 42.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Friedland HISK1 GlobalGuard Alarm System in the language / languages: English as an attachment in your email.

The manual is 2,92 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Friedland HISK1 GlobalGuard Alarm System Manual

Product: