560834
13
Zoom out
Zoom in
Previous page
1/232
Next page
13
5.10 Additional wired door/window contact detector
If an additional wired door/window contact detector is
required, wire the detector to the terminal block (1) in the
battery compartment. A cable entry cut-out is provided next
to the terminal block in the battery cover.
Connect the wired door/window contact detector using a
maximum length of 1.5 metres of any of the following:
6-core alarm cable
2-core bell wire (min. 6 x 0.2 mm)
2-core 24AWG wire
Use switch SW3 (2) to enable or disable the internal and
external wired magnetic door/window contact detectors:
Position
Function
Top
Only the internal door/window contact
detector is set to the on position.
Bottom
Both the internal and external
door/window contact detectors are set to
the on position.
If you use two door/window contact detectors for internal
and external connections simultaneously, only one activation
event will be counted if one of the contacts is opened. If one
door/window contact detector is left open and the other
closed door/window contact detector is opened, an
activation event will be counted.
If you do not use the external door/window contact
detector, set switch SW3 to the top position to make sure
that the detector operates correctly.
6 Testing and programming
6.1 Test mode (TEST MODE)
1. Make sure that the system is in disarm mode.
2. Press the button.
3. Enter the 4-digit PIN code (User).
4. Press the button.
TEST MODE
WALK TEST
WAITING…
RF ENVIRONMENT
TEST RF ENVIRONMENT
SPECTRA LIGHTING TEST
LIGHTS ON FOR 5S. STOP>ESC.
WIREFREE SIREN SERVICE OFF
SERVICE OFF. WAIT…
WIREFREE SIREN SERVICE ON
SERVICE ON. WAIT…
ALARM TEST
RELAY TEST
RELAY ON FOR 5S. STOP>ESC.
WIREFREE SIREN TEST
SIREN ON FOR 5S. STOP>ESC.
HARDWIRE SIREN TEST
SIREN ON FOR 5S. STOP>ESC.
6.1.1 Walk test (WALK TEST)
The control panel has a built-in test facility to enable you to test the siren at any time. It is recommended to test your system at
regular intervals, but at least once per three months.
Before starting the test, make sure that:
there is no movement for 3 minutes in any area protected by a PIR movement detector.
all doors/windows protected by a door/window contact detector are closed.
all battery covers and housings are installed correctly.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Friedland GlobalGuard Home Alarm System at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Friedland GlobalGuard Home Alarm System in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Friedland GlobalGuard Home Alarm System

Friedland GlobalGuard Home Alarm System Installation Guide - English, German, Dutch, French, Italian, Portuguese, Spanish - 120 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info