628407
35
Zoom out
Zoom in
Previous page
1/48
Next page
35
- Acquisition of the line module. Before the acquisition, make sure that the dip-switches
of the module are set correctly
Example:
Acquisition of 2 M4IBUS modules
Setting the 1st module = 0
Setting the 2nd module = 1
Acquisition of 1 M8IBUS module
Setting the module = 0
If a T8N is present and a 2 internal input module is present, pay attention that the module will
be addressed with the same keypad number (if the keypad is 0, the internal module is 0). Pay
attention not to create an address conflict and that the maximum limit of 16 inputs
managed by CE2N-416 control unit in the various combination is not exceeded.
Acquisition of 2 2-line modules on 2 T8N keypads (dip no. 8 positioned to ON in both
modules)
Setting the 1st module = 0 (address of the keypad 0)
Setting the 2nd module= 1 (address of the keypad 1)
Activate the “Acquisition” item from the menu relevant to the Line Modules and, after a few
seconds, all the acquired modules will be displayed.
- Cancellation of the Line Module. From this menu item, you can cancel all modules,
which are removed from the system. After selecting the “Cancellation” function, select the
reader
- Name. Each input module can be named again for being identified; this function facilitates
the identification of the installer in the event that a failure occurs.
8.3 Installer code (by default 0000000)
The installer code programs all the system.
The code has a variable length between 2 and 7 figures. For security reasons, the code is active
when the installation is completely deactivated (the installer code can be disabled from the master
menu).
This code can be modified by the
installer’s menu only.
The installer code can be entered
from any system keypad.
8.4 Clock
The control unit keeps date and
time to write the event log and
authenticate the user codes.
Attention: the clock function is not kept in the event that the power source is missing (no network
and flat battery).
Clock
Date / Time
Enter date and time
Code
Enter a code
Enter the code again
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fracarro CE2N-416 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fracarro CE2N-416 in the language / languages: English as an attachment in your email.

The manual is 4,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info