628407
34
Zoom out
Zoom in
Previous page
1/48
Next page
34
- Acquisition of the reader
The reader doesn’t have a dip-switch for defining the address number. The acquisition
procedure is different from the procedure of the other modules and consists of simply
bringing a key to the reader when the control unit is in “Reader acquisition” mode.
Activate the “Acquisition” item from the readers’ menu:
The LED indications in the reader are as follows:
- all LEDs permanently ON: reader acquired
- all LEDs flashing rapidly: the reader is under acquisition but not yet stored by the control unit
When the LEDs are flashing, bring the CH10BG electronic key up to
the reader; when the acquisition is complete, the flashing LEDs will be
permanently ON.
Follow the same methods for all the other system readers
The acquisition is confirmed by a sound tone from the keypad, which also displays the number
of the acquired modules.
The number of the readers will be automatic and progressive and will follow the acquisition
number
Example: the first memorized reader will be the number 0; the second will be the number 1,
etc.
Attention: Do not install the CH-BUS module near the magnetic fields (for example,
transformers, dimmers, etc.) that may affect the operation. The minimum distance of
installation between the two CH-BUS modules is 20 cm.
ATTENTION: during this programming phase, the CH10BG key that was used to
acquire and codify the readers was NOT scanned and, therefore, at the moment, it
is not enabled for activations.
For the key memorization, refer to the procedure given in the user’s manual.
- Cancellation of the reader. From this menu item, you can cancel the readers which will
be removed from the system. After selecting the “Cancellation” function, select the
reader
- Name. each input module can be renamed for being identified; this function facilitates the
use for the end user.
8.2.3 Line modules
The module allows the expansion of 8 lines by means of a terminal board. The module is equipped
with electronic devices to manage fast alarms (vibration, wire ..) and another terminal for the
connection of the case tampering. Furthermore, it presents the terminals to power supply the
sensors.
Acquisition
Cancellation
Acquire
Readers
Names
Select reader
Enter a name
Modules
Line modules
Keypads
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fracarro CE2N-416 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fracarro CE2N-416 in the language / languages: English as an attachment in your email.

The manual is 4,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info