628407
37
Zoom out
Zoom in
Previous page
1/48
Next page
37
ATTENTION: if a line is excluded manually or it is being TESTED and the system is
COMPLETELY ARMED, the CHBUS reader will show the LED permanently green (all armed),
the keypad will display the zone/s excluded, even if the system is completely armed, and it will
display the words “CENTRALE PARTE INSERITA”. The event log will record the exclusion of the
zone/s and, if the system is completely armed with one excluded zone, the words “TOTAL
ACTIVATION” will be displayed.
- Output function test. The CE2N-416 control unit allows for the testing of all alarm outputs
on the card by activating each of them for about 3 seconds.
- Walk test. The control unit allows you to quickly and efficiently check the correct operation
of the sensors and modules.
Place the control unit in “line walk test” mode and activate the sensors that you want to
control. The keypad buzzer will generate a tone every time that the sensor is activated and the
activation will be recorded on the display.
Press the key no. 5 on the keypad to reset the alarm.
- Walk test Tamper. The control unit allows you to quickly and efficiently check the proper
operation of the anti-tampering sensors. Place the control unit in “walk test tamper” mode and
open the cases of the sensors that you want to control. The keypad buzzer will generate a
tone every time that the contact is activated and the activation will be recorded on the display.
Press the key no. 5 on the keypad to reset the alarm.
- Channel test. The control unit allows you to test the telephone alarm channel and the
correct dispatch of the vocal and/or digital signals to a specific number.
The call is sent without generating any effective alarm.
- DTMF reception test. The control unit can test the DTMF tone reception.
This test allows you to understand if the CE2N-416 control unit recognizes the DTMF tones
sent by a phone line from a telephone.
Select an active channel and an associated phone number; press V to call.
• Answeringtheincomingcall
• NOmessageisheard
• Pressthevariousdigits1,2,3,4,5,6,7,8,9,0,*,#fromthePHONEkeypad
• FromthedisplayoftheT8Nand/orT8N-Lightkeypads,thesameguresthatarepressed
on the phone will appear in the same sequence.
If the numbers don’t appear, modify the sensitivity of the telephone from the menu
Dialler control unit phone options reception gain
If the problem is not solved, check th–e connection and/or check the signal quality
of the incoming phone line.
8.7 Exclusions
With the CE2N-416 unit, it is possible to exclude some of the control unit’s functional elements,
such as lines or outputs for eliminating possible malfunctioning. The control unit ignores an
excluded component; therefore, it is possible to neither receive alarms from an excluded line nor
activate the excluded outputs.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fracarro CE2N-416 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fracarro CE2N-416 in the language / languages: English as an attachment in your email.

The manual is 4,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info