624402

Focusrite Control 2802 Manual

8
Zoom out
Zoom in
Previous page
1/55
Next page
8 Control 2802 Operating Manual
Rear Panel Connections
Rear Panel Connections
The following table summarises the connections. Please also refer to the example systems on page 42 and page 46 for wiring
and pin-out information. For information on cabling the console, DAW and outboard devices into a patchbay system, see page 51.
Connector Name Type Typical Application
Channel MIC XLR Female Channel microphone inputs.
Channel LINE 1/4” TRS Jack Channel line level inputs - for line inputs such as synths,
samplers or external mic preamps.
Channel SND 1/4” TRS Jack Channel insert sends - to outboard processing.
Channel RET 1/4” TRS Jack Channel insert returns - from outboard processing.
DIRECT OUTPUTs DB25 Female Channel direct out - this is the main record path from the
channel; connect to your DAW tracks.
DAW INPUTS DB25 Female Channel DAW input - for playback post-recording through the
channel; connect from your DAW tracks.
SUMMING INPUT DB25 Female 8 Summing Inputs - for additional mix inputs such as submixes
from your DAW or extra effects.
NETWORK RJ45 Ethernet connection to/from your DAW.
MAIN SPKR L&R XLR Male Main speaker outputs - to main control room loudspeakers.
DAW MIX L&R XLR Female DAW Mix input - connect from your DAW’s internal mix bus; this
input may feed the console’s mix bus, cue and monitor section.
DAW FB L&R XLR Female DAW Foldback input - connect from headphone mixes
generated within your DAW; this input may feed the cue and
monitor sections.
EXT I/P L&R XLR Female External Input - this input may feed the monitor section;
connect your stereo recorder to check printed mixes.
ALT SPKR L&R XLR Male Alt speaker outputs - to a second set of control room speakers.
AUX O/P 1&2 XLR Male Aux outputs - send to effects such as reverb & delay.
CUE O/P L&R XLR Male Cue output - send to your artists headphones or a stereo effect.
MIX O/P L&R XLR Male Main Mix output - to a master recorder, or DAW, to print mixes.
FX RETURN 1 and 2 L&R 1/4” TRS Jack FX Return inputs - for extra mix inputs such as reverb returns.
COMPRESSOR IN and OUT L&R 1/4” TRS Jack External Compressor IO - patches the bus compressor.
MIX INSERT SND and RET L&R 1/4” TRS Jack Main Mix insert - send/return main mix outboard processing.
TALKBACK XLR Female External Talkback mic - connect an alternate mic for talback.
Phones Headphone socket For control room headphones.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Focusrite Control 2802 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Focusrite Control 2802 in the language / languages: English as an attachment in your email.

The manual is 31,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info