624402
6
Zoom out
Zoom in
Previous page
1/55
Next page
6 Control 2802 Operating Manual
Installation
Installation
Package Contents
Your packaging should contain the following:
Control 2802 console
IEC power cord
CD containing the documentation and drivers.
Check for any signs of transit damage. If any signs of
mishandling are found please notify the carrier and inform your
dealer immediately.
Important Safety Instructions
Please read all of the safety instructions at the beginning of this
manual before connecting to the mains and powering up the
console. To prevent electrical shock and re hazard, follow all
warnings and instructions marked on the rear of the console.
This unit if connected via its IEC power cord to the mains
safety earth.
NEVER OPERATE THIS CONSOLE WITH THIS EARTH
CONNECTION REMOVED.
Internal Switch Mode Power Supply & Mains
Fuse
The console utilises an internal switch-mode power supply
that is very quiet and passively cooled with plenty of current
capability and headroom. This switch-mode design will accept
any A.C line voltage from 100-240v ±10%. Therefore, the
console will work anywhere in the world provided that your A.C
mains line voltage is within this specication.
Consult a qualied technician if you suspect difculties.
Do NOT attempt to tamper with the power supply or mains
voltages – HAZARDOUS TO HEALTH.
Always replace the mains fuse with the correct value – T2A
slow blow.
Power Up
On power up, please check that the power rail indicators for
+48v d.c and +/-18v d.c light on the top right hand side of the
console:
Service and Repair
The console uses a complex internal PCB sandwich
arrangement making eld service only possible by a qualied
technician.
If any technical issues do arise with your console, please
contact your dealer as soon as possible to arrange for
technical support.
Do NOT attempt to x the console unless qualied to do so.
See the warranty information at the beginning of this manual
for details of your cover.
Dimensions (including rubber feet)
Height Front: 60 mm
Height Rear: 170 mm
Width: 450 mm
Depth: 550 mm
Ventilation
Care should be taken not to obstruct the series of ventilation
holes in the metalwork of the console. The unit is designed
to release heat and take adequate air ow via these holes to
ensure longevity of performance.
These can be found along the left hand bottom edge on
the side panel (below the cheek), the rear top wrap-around
ventilation panel and below the faders at the foot of the
console.
If mounting the console into some form of studio furniture or
desk, please ensure that there are sufcient air gaps at these
locations:
Lexan Overlay
The front panel at the top of the console (dark section only)
features a rugged under-surface printed polycarbonate overlay.
Exposure to direct sunlight for extended periods of time should
be avoided as this can have a detrimental effect on the overlay
panel and the control knobs.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Focusrite Control 2802 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Focusrite Control 2802 in the language / languages: English as an attachment in your email.

The manual is 31,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info