Manual Focusrite Control 2802 (page 7 of 55) (English)

624402

Zoom out

Zoom in

1/55

Introduction

Control 2802 Operating Manual 7

Introduction

Control 2802 is both an analogue recording console and DAW control surface.

Analogue Console - 8 Channel Strips and Master Section:

With eight class-A hybrid discrete mic preamps, LED bargraph

metering, input signal conditioning, assignable direct outputs

and cue monitoring, Control 2802 is ideal as a location

recording or tracking console.

Control 2802 is equally comfortable as a hybrid mixing tool –

featuring a DAW control surface layer and up to 32 analogue

inputs on mixdown.

The high number of inputs is achieved via 16 inputs in the

channels (mic/line + alternative cue input), plus a further 16

inputs in the master section (8-channel Summing Input, two

stereo FX returns, stereo DAW Mix input & stereo mix insert

running in “parallel sum” mode).

Each mic/line channel has two aux sends, a stereo cue (or

alternate input), switchable insert and DAW return for in-line

recording. The stereo mix bus includes a master fader, insert

point and bus compressor, which may be removed from the

main mix and patched elsewhere using its own external IO.

The monitor section includes mono, dim, phase and talkback,

plus an i-Jack input for monitoring MP3 players. Outputs

connect to main and alternate speakers plus headphones.

DAW Controller - 8 dual-layer Fader Strips and Control Panel:

The 8 Fader Strips (faders, SEL, CUT & SOLO) ip between

controlling analogue channel levels and track faders within the

DAW. This dual-layer technology makes it easy to switch from

analogue to DAW control in an instant.

When working in the DAW layer, the console remotely

adjusts parameters within the DAW software via an Ethernet

connection (using the HUI

control surface protocol).

At any one time, 8 DAW tracks may be adjusted from the

console’s Fader Strips. These are the tracks “in focus” within

the DAW software (paged to the HUI

controller).

Each of the 8 channel faders is motorised, and both the

analogue and DAW layers can be fully automated.

To the right of the channel faders is the master fader (not

automated or dual-layer), which controls the main mix bus.

The Fader Strip layer switching, and other DAW parameters,

such as auxes, plug-ins, transport and automation, are

controlled from Control Surface Centre Section - this includes

a jog/shuttle wheel, transport buttons, 4 rotary encoders and

OLED channel displays.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Focusrite Control 2802 in the language / languages: English as an attachment in your email.

The manual is 31,5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Focusrite Control 2802 Manual

Product: