803514

Flyer Gotour6 2024 Manual

185
Zoom out
Zoom in
Previous page
1/260
Next page
179
DE
Quick release, quick-release axles and
joints
• Clean the quick release, quick-release
axles and other joints with a clean and
lightly oiled cloth or soft brush.
• Lubricate the quick releases, quick-re-
lease axles and other joints with a suitable
lubricant approved by the manufacturer
after each cleaning, after cycling in the
rain or after the suspension elements have
become very wet for any other reason.
Ask your FLYER specialist dealer to
instruct you on how to carry out this task.
Lighting components
• Clean the lighting components (headlight,
rear light and reflectors) with a damp cloth
with clear water or, if necessary, with mild
soapy water. Afterwards, wash off the
soap suds with clear water.
9 Maintenance and
replacement of wear
parts
i
Important: Check and maintain your
e-bike and the components installed
on it every six months as described in
this chapter so that you can notice
signs of wear yourself in good time
and prevent functional losses.
WARNING!
Risk of accident and injury
The e-bike and its components are sub-
ject to wear and high stress. Different
materials and components can react
differently to wear or continuous stress.
If a component's planned service life is
exceeded, it can suddenly fail, possibly
causing harm to the cyclist.
• If a component shows any type of
cracks, scoring or color changes in
highly stressed areas, replace the
component.
If components wear out unnoticed, a
loss of function of the component and
consequently a fall and serious injuries
can result.
• In addition to the inspection
described here, which you carry out
yourself, have your e-bike inspected
regularly by a FLYER specialist
dealer as indicated and have worn
components replaced.18
Wheel set
• Check the tires for cracks and damage and
determine if the tread is in the correct range.
Have damaged or worn tires replaced
by your FLYER specialist dealer.
• Check the tire pressure.19
Deflate or inflate the tire if the tire
pressure is too high or too low.
• Check the rims for damage.
Some rims have indentations to deter-
mine the wear limit. In this case, check
whether the indentation on the rim can be
felt. If the indentation is hardly or not at
all noticeable, the rim must be replaced.
Have wear on carbon rims determined by
your FLYER specialist dealer.
Have damaged or worn rims replaced
by your FLYER specialist dealer.
• Check the spoke tension.
To do so, gently squeeze two spokes
at a time and determine if the spokes
have even tension.
If spokes are loose, have them retight-
ened by your FLYER specialist dealer.
• Make sure that the fenders are correctly
aligned and that the struts are firmly fixed
in the tear-off locks.
The wheel set must pass the fenders
without contact.
18 For information on regular inspection by a FLYER
specialist dealer, see chapter 7.6 “Regular inspection”.
19 Information on the correct tire pressure can be found
in chapter 19 “Wheel sets and tires”.
… 185 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Flyer Gotour6 2024 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Flyer Gotour6 2024 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 32.22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info