803514

Flyer Gotour6 2024 Manual

184
Zoom out
Zoom in
Previous page
1/260
Next page
178
8 Cleaning and care
i
Important: Clean and maintain
your e-bike and the components
installed on it as described in this
chapter to prevent functional losses
and premature wear.
i
Important: If possible, remove the
battery before cleaning.
WARNING!
Risk of accident and injury
The use of unsuitable cleaning agents,
lubricants or care products can cause
damage and reduced functionality of
your e-bike or safety-relevant compo-
nents, resulting in accidents and seri-
ous injuries.
• Note that not all lubricants and care
products are suitable for your e-bike
or its components.
• Only use cleaning agents and lubri-
cants recommended or approved by
the component manufacturer.
• Do not allow cleaning or mainte-
nance products or oils to get on
brake pads, brake discs and brake
rim surfaces as this will reduce
brake performance.
Frame and wheel set
• Clean the frame of your e-bike, the wheel
set and fenders with a damp cloth with
clean water or, if necessary, with mild
soapy water. Afterwards, wash off the
soap suds with clear water.
i
Important: Never clean your e-bike
with a high-pressure cleaner, com-
pressed air or spray your e-bike
with a hose for cleaning. This could
cause damage to the components
of the electric drive system, among
other things.
Operating elements
• Clean the operating elements with a dry
or slightly damp cloth.
Make sure that no liquid gets into the
housings of the electrical control ele-
ments.
Chain drive components
• Clean the chain and both sprockets with a
clean and lightly oiled cloth or soft brush.
• Oil the chain with universal oil after every
cleaning, after cycling in the rain or after
the chain has become very wet for any
other reason and regularly after about 15
hours of use.
Components of belt drives
i
Important: Belt drives are NOT
oiled or greased!
• Clean the profiles of belts and pulleys dry
with a soft brush or, if necessary, with mild
soapy water. Afterwards, wash off the
soap suds with clear water.
• Carefully remove any trapped dirt or
small stones with a plastic pin. Do not
use sharp-edged tools under any circum-
stances!
Electric drive components
• Follow the instructions for cleaning the
individual drive components in the corre-
sponding manufacturer's manual for your
electric drive.
Disc brakes
• Clean dirty brake discs with a suitable
brake cleaner approved by the manufac-
turer.
Rim brakes
• Clean dirty brake pads, rims and brake
cables with a slightly damp cloth.
Coaster brake
The coaster brake is installed in the rear
hub, which means that its components do
not have to be cleaned separately.
Suspension components
• Clean the suspension elements with a
clean and lightly oiled cloth or soft brush.
• Lubricate the suspension elements with an
original lubricant from the suspension ele-
ment manufacturer after every cleaning,
after cycling in the rain or after they have
become very wet for any other reason.
… 184 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Flyer Gotour6 2024 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Flyer Gotour6 2024 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 32.22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info