803528
283
Zoom out
Zoom in
Previous page
1/412
Next page
35
EN
Chargingthebattery
The battery can be charged while it is installed in
the e-bike or once it has been removed.
Safetywarningforthebatterycharger
The name plate on the charger refers to warning
notes and other safety information in connection
with handling the charger. Be sure to read this be-
fore use. Please note the temperature ranges of
the battery and charger:
Battery operating temperature: -5 °C to 40 °C
Battery storage temperature: 10 °C to 40 °C
Charging temperature range: 0 °C to 40 °C
Only use the charger supplied with your
e-bike. Only this charger is designed for
the lithium-ion battery used on your
e-bike.
Completely charge the battery using the
chargerbeforetherstridetoensurefull
battery performance. Read and adhere
to the operating instructions for the
charger when charging the battery. Do
not connect the charger to the mains
socket immediately after a sudden tem-
perature change from cold to warm. It is
possible that condensed water has col-
lected on the contacts and this will lead
to a short circuit. Do not connect the bat-
tery to the charger immediately after a
sudden temperature change from cold to
warm. Wait until both devices have
reached room temperature before con-
necting the charger or the battery.
Only charge and store the battery and
charger in a dry indoor space and keep
themawayfromhotandammableob-
jects.
Donotexposethechargertorainorwet
environments. If water enters the char-
ger, there is a risk of electric shock.
The battery can at any time be charged outside
or installed in the bicycle without reducing its life
span. Interrupting the charging process does not
damage the battery.
The battery is equipped with a temperature mon-
itor that permits charging only within a tempera-
ture range of 0 °C to 40 °C.
In this case, separate the battery from the charger
and wait until it has reached operating tempera-
ture. Only reconnect the charger when it has
reached the permitted operating temperature.
The charger itself can also indicate problems via
theredLEDashing.
Chargerstatusdisplay(LED):
The LED on the charger indicates the following
states:
-ashinggreen-->standby(nobattery connec-
ted)
- continuous red --> battery charging
- continuous green --> battery fully charged
-ashingred-->chargererror
Blinking
patternof
charger LED
Description Action
Blinking red
Charging er-
ror
An error has
occurred in
the battery
or charger.
Charging
cannot be
continued.
Remove any
dirt from the
terminals and
plugs. If the
problem per-
sists, contact
your FLYER
specialist
retailer.
1 Remove the rubber cap
Open the rubber cap on the battery. Connect the
mains plug to a mains socket (220 V – 240 V AC) and
connect the charger to the battery.
Rubber cap
Charger plug
charger
connector
283


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Flyer Crossocver - Fit 2022 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Flyer Crossocver - Fit 2022 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 34.98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info