803528
281
Zoom out
Zoom in
Previous page
1/412
Next page
33
EN
Always remove the battery before clean-
ing, maintaining or repairing your e-bike.
Ensure that you do not touch and thus
possibly connect contacts when clean-
ing or maintaining the battery.
You risk being hurt and the battery may
su󰀨erdamageifthecontactsarelive.
Do not use a strong water jet or high-pres-
sure cleaner for cleaning. The cleaning
liquid may enter sealed bearings due to
high pressure, dilute the lubricant and in-
crease friction. As a result, rust is formed
which destroys the bearings. Cleaning
with a high-pressure cleaner may dam-
age the electrical system.
The following are not suitable for clean-
ing your FLYER e-bike:
Acids
Fats
Oil
Brake cleaner (only to use on brake
discs)
Solvent-based liquids.
These damage the surfaces and contrib-
ute to wear on the FLYER e-bike.
After use, ensure that you dispose of the
lubricant, cleaning and care products in
an environmentally friendly way. These
substances do not belong in domestic
waste, in the drain or in natural environ-
ments.
Smooth operation and durability of your
FLYER e-bike depend on appropriate
maintenance and care for your FLYER.
Regularly clean your FLYER with
warm water, small amounts of clean-
ing agent and a sponge.
While cleaning the FLYER, always
check your e-bike for cracks, notches
or material deformities.
Damaged parts must be replaced with
original spare parts. Please only ride
your FLYER again after this check
has been carried out.
Have any paint damage removed by
your FLYER specialist retailer.
Further important information concerning care for
your FLYER e-bike is provided on the website of
the respective component manufacturer.
Speed sensor
The speed sensor is used to show the speed in
the FLYER display and correctly calculate the as-
sistance needed.
The speed sensor and the associated spoke magnet
must be fastened so that the distance between the
spoke magnet and the marking position on the speed
sensoris1to5mm.If the distanceisdi󰀨erent,an
error message will appear.
Powersupplytoexternaldevices
YoucanusetheUSBporttochargeexternalde-
vices, e.g. smartphones, that can be powered via
USB. The charging cable of the device can be
connected directly to the FLYER display.
Inordertochargeexternaldevices,yourFLYER
e-bike must contain a charged FLYER battery.
Open the cover of the USB port on the display
and connect the charging cable to it.
Do not place the connected device on
a tilted or unstable place while charg-
ing. Otherwise, it could fall and be-
come damaged.
Do not charge external devices in
rainy weather or connect a wet USB
cable. The USB connection is not wa-
terproof!
You must not connect external de-
vices when riding in the rain and the
USB port must be completely covered
by the protective cap.
After using the USB port, be sure to
rmlytightentherubbercap.
Make sure that the voltage of the USB
port is suitable for your device. (See the
technical data for the voltages)
281


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Flyer Crossocver - Fit 2022 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Flyer Crossocver - Fit 2022 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 34.98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info