Manual Flyer Crossocver - Fit 2022 (page 280 of 412) (English, German, Dutch, French, Italian)

803528

280

Zoom out

Zoom in

1/412

5.24 Conguringtheassistance

modes

Youcanconguretheassistancelevelviathe+

and – buttons on the FLYER RCO remote control

operating console.

HIGH Maximumassistanceforactive

riding up to high pedalling

frequencies.

STD Powerful assistance level for

activeridingincitytra󰀩c

ECO E󰀨ectiveassistancelevelwith

optimume󰀩ciencyformaximum

range.

AUTO The system automatically and

independently selects the correct

assistance for the current riding

situation.

OFF No motor assistance. You

ride your FLYER like a normal

bicycle. All on-board computer

functions are available.

Pushing aid

5.25 Lights

Di󰀨erent lighting systems are installed depend-

ing on the area of use and bicycle type. If this is

done using a daytime running light function, the

system will always switch automatically between

low beam and daytime running light.

FLYER with pedal assist over 25 km/h w/o

main beam

Basic setting: when the system is activated, the

low beam/daytime running light is automatically

switched on.

Light button function: no function

FLYER with pedal assist over 25 km/h with

high beam

Basic setting: when the system is activated, the

low beam/daytime running light is automatically

switched on.

Light button function: Switch between low beam/

daytime running light and high beam

FLYER e-mountainbikes

Basic setting: when the system is activated, the

lightremainsswitchedo󰀨.Lightbuttonfunctions:

Activate the light by pressing the light button;

switch between low and high beam (if high beam

function is available) by pressing the light button

again.Switcho󰀨thelightbypressingandholding

the light button (at least 1 second). Switching bet-

ween low beam/daytime running light: Automatic

switching based on the integrated light sensor.

FLYER with pedal assist up to 25 km/h

Basic setting: when the system is activated, the

light automatically switches on.

Light button functions: Switch o󰀨 the light by

pressing the light button. Switch the light back on

by pressing the light button again.

5.26 Electrical motor

How the electrical motor works

The motor starts working as soon as you start

pedalling when one of the assistance levels has

been selected.

The performance of the motor depends on sev-

eral factors:

• The force used while pedalling.

The assistance is more gentle when you

pedal with low force than when you pedal with

higher force, e.g. while riding uphill. However,

this increases the power consumption and

decreases the range.

• The assistance mode

The higher the level of assistance, the more

power the motor will provide. However,

high motor performance means high power

consumption. The lowest assistance mode

provides the least assistance but also the

longest range.

Range

Any specied range information is usually ob-

tained under optimal conditions. Ranges achieved

under everyday conditions will usually be shorter.

Please consider this when planning your route.

The range depends on many factors. These in-

clude battery capacity, motor assistance level

selected, geographical conditions, road surface,

driving style, environmental temperature, the

weight of the rider, tyre pressure and the technical

state of your FLYER e-bike.

Extreme ambient temperatures may reduce the

range. The operating temperature should be kept

within the range from -5 degrees to 40 degrees.

Driving without drive assistance

You can also ride your FLYER without drive as-

sistance by selecting the assistance level “OFF”.

However, you must ensure that your system is

always switched on.

Never drive without a battery or with your

systemswitchedo󰀨,asthefunctionsof

the operating unit and the lighting func-

tions are not available in this case.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Flyer Crossocver - Fit 2022 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 34.98 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Flyer Crossocver - Fit 2022 Manual

Product: