803528
285
Zoom out
Zoom in
Previous page
1/412
Next page
37
EN
Preventextremeoverheatingduetoex-
ternale󰀨ectsoroverloading.
Only use the battery with your FLYER.
Never use a damaged battery. If you
discover cracks, deformation of the
housing or leaks, stop using the bat-
tery and have your FLYER checked
by a specialist retailer. Damaged bat-
teries must not be posted.
The lighting function will still continue
forapprox.onehourafterthebattery
is empty.
5.28 seattubebatterySTB
1LEDchargestatusdisplay
Shows the battery’s remaining charge. If an error
occurs, an error code is displayed (see Chapter
5.29 Battery error codes)
Akkuladestandsanzeige
Jede leuchtende Akkuladestandsleuchte steht für ca. 20 % der Akkukapazität.
Akkuladestandsleuchten 5 an 4 an 3 an 2 an 1 an 1 blinkt*1
5 an 4 an 3 an 2 an 1 an 1 blinkt*1
Anteil der Akkukapazität
im Vergleich zum voll
geladenen Akku
81 % bis 100 % 61% bis 80% 41% bis 60% 21% bis 40% 11% bis 20% 1% bis 10%
*1 Wenn keine Restkapazität mehr im Akku vorhanden ist, blinkt eine Akkuladestandsleuchte schnell.
Akkuladestandsanzeige
Jede leuchtende Akkuladestandsleuchte steht für ca. 20 % der Akkukapazität.
Akkuladestandsleuchten 5 an 4 an 3 an 2 an 1 an 1 blinkt*1
5 an 4 an 3 an 2 an 1 an 1 blinkt*1
Anteil der Akkukapazität
im Vergleich zum voll
geladenen Akku
81 % bis 100 % 61% bis 80% 41% bis 60% 21% bis 40% 11% bis 20% 1% bis 10%
*1 Wenn keine Restkapazität mehr im Akku vorhanden ist, blinkt eine Akkuladestandsleuchte schnell.
1
3
4
2
2Controlbuttonforbatterychargelevel
Let the LED battery charge level indicator blink to
verify the remaining battery power.
3 Charger port
4 Rubber cap
Protects the connectors for the charger when the
battery is not being charged.
Check whether the battery is fully char-
ged after you have purchased it and be-
foreusingitforthersttime.
To check if the battery is charging, press the con-
trol button to be shown the battery charge level.
Charge the battery when none of the LEDs light
up. Only use the original charger. Never use char-
gers supplied by third-party companies.
Charging status indicator
The charging status of the battery is indicated by
veLEDs.
Afast-ashingLEDindicatesthatthebatteryhas
been completely discharged.
Removingthebattery
1) Switch o󰀨 the electrical system rst. Press
theon/o󰀨buttonforthispurpose.
2) Unlock the battery with the battery key and
removeitfromtheholder.Holdthebatteryrmly,
as it is heavy.
Loadingthebattery
The battery can be charged while it is installed in
the e-bike or once it has been removed.
1)Removetherubbercap
Open the rubber cap on the battery.
Connect the mains plug to a mains socket (220
V - 240 V AC) and connect the charger to the
battery.
Do not connect the charger to the mains
socket immediately after a sudden tem-
perature change from cold to warm. It is
possible that condensed water has col-
lected on the contacts and this will lead
to a short circuit. Do not connect the bat-
tery to the charger immediately after a
sudden temperature change from cold to
warm. Wait until both devices have rea-
285


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Flyer Crossocver - Fit 2022 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Flyer Crossocver - Fit 2022 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 34.98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info