624064

Fluke networks TS23 PRO Manual

15
Zoom out
Zoom in
Previous page
1/22
Next page
11
How to Use the Monitor and Talk Modes
Dialing and Storing Numbers in Memory
Last Number Redial (LNR)
To redial the last number you dialed since you turned
on the test set, go off-hook then press
l.
If the test set goes off-hook, and you press any dialing
key, the LNR memory is deleted and the key is stored as
the first digit in LNR memory.
The dialing keys that are stored in LNR memory are
1
2 3 4 5 6 7 8 9 * #. The star (*) and pound (#)
keys are not redialed when the test set is in pulse
dialing mode even if the redial memory includes them.
Program Speed Dialing Numbers
The test set has nine memory locations for speed dial
numbers. Each location stores up to 23 digits. If you try
to enter more than 23 digits, only the first 23 are
stored. To put a pause in a number, press
F.
To store a speed dialing number:
1
Press Q.
2
Press r.
3
Enter the number you want to store.
4
Press S, then press the number of the memory
location (
1 through 9) where you want to store
the number.
Putting a Pause in a Stored Number
Note
Each time the
F key is pressed, it counts as
one dialing digit.
In some situations, you need a pause between the
digits of the number you dial. For example, to dial out
through a PBX, you dial 9, wait for the PBX to connect
to an outside line, then dial the remaining digits. The
pause function lets you put a pause between the digits
in a speed-dial number so that you do not need to dial
the number manually.
For example, if you enter “
9 F 2 3 4 5 6 7 8”
into a speed dial memory location, then recall that
number, the test set dials a 9, then waits for the pause
duration of 4 seconds. This gives the PBX time to
connect to an outside line. Then, the test set dials the
remaining digits “2345678”. If you need a delay longer
than 4 seconds, press
F more than once when you
enter the number into memory. For example, if you
press
F twice, you get a pause of 8 seconds. Each
pause shows as a comma in the number.
Storing the Number You are Calling
After you dial a number, you can save it in one of the
memory locations for the speed dialing function:
1
Connect the test set to a working telephone line.
2
Press P, then dial the number.
3
Press S, then press the number of the memory
location key (
1 through 9) where you want to
store the number.
Dialing a Number with the Speed Dial Function
1
Connect the test set to a working telephone line.
2
Press P.
3
When the test set goes off-hook, press r then the
number key (
1 through 9) for the memory
location. For example, to dial the number stored in
location 5, press r and then 5.
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fluke networks TS23 PRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fluke networks TS23 PRO in the language / languages: English as an attachment in your email.

The manual is 0,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info