Manual Fluke networks IntelliTone Pro 200 (page 11 of 21) (English)

775815

Zoom out

Zoom in

1/21

Isolating Individual Wire Pairs with the SmartTone Analog Function

Isolating Individual Wire Pairs with

the SmartTone Analog Function

The  position on the IntelliTone probe and toner lets

you use the probe to trace using an analog tone.

SmartTone is intended for use on dry pairs of wires that

are un-terminated at both ends of the run. It is not

intended to be used on live wires with a DC power source

(e.g., live telephone lines), nor will it work on wire pairs

that are carrying AC signals. SmartTone works on many

types of wire pairs including twisted pair, house wiring,

and coax (the shield is one wire and the center conductor

is the other wire of the pair).

SmartTone Positive Identification

The toner red lead must be connected to one of the

wires of the pair, and the black lead must be

connected to the other wire of the pair.

Put the toner and probe in the  position.

At the far end of the cable run, place the probe near

the wires you are tracing. Pick the pair that gives the

loudest signal in the toner speaker.

Short and release the two wires of the pair. If you

hear a change in the pattern of the tone, then you

have located the target pair of wires.

If you don’t hear a change in the tone pattern, then

pick a different pair and try again until you find the

pair that causes the tone pattern to change.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fluke networks IntelliTone Pro 200 in the language / languages: English as an attachment in your email.

The manual is 0.72 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fluke networks IntelliTone Pro 200

Fluke networks IntelliTone Pro 200 Quick start guide - English, German, French, Spanish - 2 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fluke networks IntelliTone Pro 200 Manual

Product: