763940
74
Zoom out
Zoom in
Previous page
1/100
Next page
8808A
Users Manual
4-14
Table 4-6. Description of Bits in ESR and ESE
Bit No. Name Condition
0 Operation Complete (OPC) All commands before receipt of an *OPC command have
been executed. Interface is ready to accept another
message.
1 Not used Always set to 0.
2 Query Error (QYE) Attempted to read data from the Meter's output buffer when
no output was present or pending.
Or received a new command line before a previous query
was read.
Or input and output buffers were full.
3 Device-Dependent Error (DDE) Incorrect input during calibration.
Or RS-232 input buffer overflow.
4 Execution Error (EXE) Command was understood but could not be executed. This
can result from a command that contained an inappropriate
parameter.
5 Command Error (CME) Command was not executed because it was not
understood. This can result from a command that contained
a syntax error.
6 Not used Always set to 0.
7 Power On Power was cycled off and on since the last time the ESR
was read or cleared.
Status Byte Register
The STB is a binary-encoded register that contains eight bits. Note that the SRE uses bits
1 through 5 and 7 to set bit 6, the Master Summary Status (MSS) bit, as enabled by the
SRE. The eight STB bits are described in Table 4-7, and are read using the *STB?
command.
Table 4-7. Description of Bits in the Status Byte Register (STB)
Bit No. Name Condition
0 Not used Always set to 0.
1 Not used Always set to 0.
2 Not used Always set to 0.
3 Not used Always set to 0.
4 Message Available (MAV) Data is available in output buffer. Bit set to 1 when
response to query placed in output buffer. Bit cleared (set to
0) when output terminator sent to host.
5 Event Status (ESB) One or more of enabled events in the Event Status Register
have occurred. To determine which events have occurred,
send command *ERR? to read the Event Status Register.
74


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fluke 8808A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fluke 8808A in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fluke 8808A

Fluke 8808A User Manual - German - 102 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info