763940
58
Zoom out
Zoom in
Previous page
1/100
Next page
8808A
Users Manual
3-24
Using the Number Editor
Use the number editor to edit the relative base for the relative readings modifier and to set
the high and low threshold values for the compare function.
Note that you can abort the number editor and return the Meter to normal operation by
pressing Q.
To use the number editor:
1. Select the number to be edited by pressing the applicable buttons as shown in
Table 3-8.
The last number entered or value measured is displayed with the leftmost digit
bright and the remaining digits dim. (If the number is negative, the minus sign is
bright.) Related annunciators are displayed.
Table 3-8. Number Editor Options
Buttons Number Editor Invoked for
Q then V Low threshold limit for compare mode
Q then U High threshold limit for compare mode
Q then T Relative base for relative readings modifier
2. Press U or V to increment or decrement the highlighted digit to the desired
number (from 0 to 9). When the digit is set to the desired number, press S1
through S6 to select the next digit to edit. S1 corresponds to the left-most digit
and S6 corresponds to the right-most digit. Repeat this step until you have set all
the digits to their desired values.
3. When the value has been set, press C to toggle the sign between positive and
negative. If the sign is positive, the negative sign (–) is off. If the sign is negative,
the negative sign (–) is on.
4. For Low/High threshold, press R to select the desired range for threshold
values. The range goes one step up by pressing R once. If the range reaches
the top range, the next press wraps back to range 1 and the value will be cleared.
5. When you are finished editing the number, press and hold R for 2 seconds to
store the value.
Function Keys S1 – S6
Function keys a through f allow you to save and recall up to six measurement
configurations. This helps speed the process of setting up the Meter, and is particularly
useful if you repeatedly need the same configurations.
To save the present configuration, press Q and then press the function key to which
you want to store the configuration.
To recall a configuration, press the applicable function key. A beep sounds when the
configuration is ready for use, and Setup 8 indicates the number of the latest stored
configuration.
When a configuration is stored, it includes the following:
Measurement function and initial range on primary display
Measurement function on secondary display
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fluke 8808A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fluke 8808A in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fluke 8808A

Fluke 8808A User Manual - German - 102 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info