764336
74
Zoom out
Zoom in
Previous page
1/130
Next page
753/754
Users Manual
62
Square root percent of scale is in effect until the Product
is changed to a different source function or the Scale
softkey is pushed and you select a different scale mode.
Step and Ramp the Output Value
Two features are available that let you adjust the value of
source functions, except pressure. For pressure, an
external pressure source must be used:
Step the output manually with and , or in
automatic mode.
Ramp the output with optional continuity or V trip
detect.
Manual Step Use
The manual Step feature selects a step size in
engineering units (mV, V, mA, °C, etc.) or % of scale.
Step the output in % of scale to quickly jump between 0 %
and 100 % (set step size = 100 %) or 0-50-100 % (set
step size = 50 %). Step works in SOURCE and in
MEASURE/SOURCE modes.
To select a step size:
1. See the applicable Source Mode subheading in this
manual (for example, “Source Electrical Parameters”)
and connect the Product to the test circuit.
2. If necessary, push for SOURCE mode.
3. Set the Product for the necessary source value.
4. To step the source value in % of scale, set the % of
scale value as given before in “Measurement Scale”.
5. Push the Step softkey.
6. Use the numeric keypad to record the step size in the
units shown on the display.
7. Push the Done softkey.
8. Push and to adjust the output in steps.
Auto Step Use
To configure the Product to make a sequence of steps
automatically, either once through the sequence or
repetitively:
1. See the applicable Source Mode subheading in this
manual (for example, “Source Electrical Parameters”)
and connect the Product to the test circuit.
2. If necessary, push for SOURCE mode.
3. Set the Product for the necessary source value.
4. To step the source value in % of scale, set the % of
scale value as given before in “Measurement Scale”.
5. Push the Step softkey.
6. Push the Auto Step softkey.
74


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fluke 754 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fluke 754 in the language / languages: English as an attachment in your email.

The manual is 5,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fluke 754

Fluke 754 User Manual - German - 130 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info