775836

Fluke 1777 Manual

33
Zoom out
Zoom in
Previous page
1/62
Next page
3 Phase Power Quality Analyzer
Measurement Configuration
27
To stop a logging session:
1. Tap .
A confirmation message shows on the display.
2. To continue, confirm that you want to stop the logging session.
The Analyzer stores the measurements in memory with this file name convention:
Meter.xxx (xxx = three digits).
Each time a session is stored, the digits increment and save a new file.
To proceed in PQ Meter mode:
1. Select Verify Meter.
The Verify Meter screen shows that the voltage and current probes are correctly
connected (correct phasing and correct probe orientation).
2. If an error has been made, select Correct Digitally at the foot of the screen or push Auto
Correct to apply corrections automatically.
3. If the readings on screen are as expected, push START or go back to Setup.
Setup
In Measurement Settings, the basic setup from the Start Up Wizard shows on the display.
Select any item on screen to adjust these settings.
To p o l o g y
To select a topology, go through the list by dragging the scroll bar at the left side of the list or
tap on the cursor buttons at the top and bottom of the list.
The display updates to show the wiring diagram for each topology.
Nominal Voltage and Frequency
The nominal voltage is the expected voltage of the system. If this is set incorrectly, the voltage
continues to be shown but the resulting power quality reports will be incorrect as they require
the nominal voltage to compare with the allowable deviation. Similarly, the nominal voltage and
nominal frequency may be changed using the same method.
… 33 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fluke 1777 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fluke 1777 in the language / languages: English as an attachment in your email.

The manual is 3.36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info