775836
32
Zoom out
Zoom in
Previous page
1/62
Next page
1773/1775/1777
Users Manual
26
2. Read the current measurements for phases A/L1, B/L2, C/L3, and N.
A yellow START button indicates errors found in the connection. Watch for undervoltage or
overvoltage indications, polarity of current probes, and the phase rotation for voltage and
current. Most installations use a clockwise rotation.
a. Make sure to check also phasor and scope in the Verify Phasor and Verify Scope
menus.
b. Push Correct Digitally to make changes on the connection or push Auto Correct to
apply corrections automatically.
If no errors are found, the START button turns green.
3. Push START to activate all measurement parameters. The measurement parameters are
also stored to the internal flash drive.
4. Navigate through the available measurement screens with the left touch buttons. Swipe up
and down to see them all.
5. Push C to take a screen shot.
6. Download the measurement during and after the logging session with Energy Analyze Plus.
a. In the software, click Download Data and copy the logging session from the Analyzer to
the PC.
b. Open the session and view the measurement data. For more information about how to
use the software, see Energy Analyze Plus Online Help.
Measurement Configuration
The Home screen has two configuration options for measurement: PQ Meter and PQ Logger.
PQ Meter Mode
The PQ Meter mode offers instant measurements to troubleshoot power quality. During the PQ
Meter session, the Analyzer captures and shows the measurements on the display. These
measurements are automatically stored in memory every second for up to 24 hours. A flashing
green power button on the Analyzer indicates an active session. See User Interface.
A red recording icon shows on the display above the measurements and indicates an
active logging session.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fluke 1777 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fluke 1777 in the language / languages: English as an attachment in your email.

The manual is 3.36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info