775836
30
Zoom out
Zoom in
Previous page
1/62
Next page
1773/1775/1777
Users Manual
24
Auto-Copy Data to USB
The Analyzer supports automatic actions on insertion of the USB flash drive. This is helpful to
gather data from the Analyzer without the need to establish a connection to the Analyzer to
download the data to the PC.
To enable the auto-copy mode:
1. On a USB flash drive, create the folder Fluke177x (no spaces in file name).
2. Create a file AutoCopyData.txt in the \Fluke177x folder.
3. Make sure the Analyzer is powered from mains.
4. Plug the USB flash drive into the Logger.
All recorded measurement data is copied to the USB flash drive. During the file transfer the
Start/Stop LED flashes white. This can take a few minutes depending on the amount of stored
data. You can remove the USB flash drive when the Start/Stop LED changes color to green. If
the LED is amber, an important warning or information is available. See the remote control
software, such as Energy Analyze Plus, for more information.
To disable the auto-copy mode:
1. Go to the folder Fluke177x on the USB flash drive.
2. Remove or change the name of the AutoCopyData.txt file.
First-time Use/Setup Wizard
Before you start:
1. Attach the wire clips to both sides of the current probe cables. Depending on the region,
use clips labeled A, B, C, N or 1, 2, 3, N.
2. Assemble the magnet hanger if you plan to use.
3. Connect the Analyzer to mains power and follow the first-time use/setup wizard to
configure the date, time, time zone, phase color scheme and label, as well as nominal
voltage and frequency.
4. Keep the Analyzer turned on until the battery is fully charged.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fluke 1777 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fluke 1777 in the language / languages: English as an attachment in your email.

The manual is 3.36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info