733461
109
Zoom out
Zoom in
Previous page
1/117
Next page
GB IE NI
108
To protect the shredder from clogging,
shred wilted garden waste that has
been left for a few days and shred thin
twigs alternately with branches.
Before you shred roots, remove any
remaining soil and stones from them
Do not shred soft, damp material such
as kitchen waste, grass or leaves:
compost it directly.
Keep a few dry branches for the end,
as they will help clean the shredder.
Only switch the shredder off when all
of the shredding material has passed
through the cylinder blade (23).
Otherwise, the cylinder blade (23)
may jam the next time you switch the
shredder on.
Shredding the material
1. Connect the power supply and
switch the shredder ON to start
shredding the material (see"
switch the shredder on and off" )
2. Adjust the pressure plate (24) to
correct position by rotating the
adjustor screw (4). (see" adjusting
the pressure plate")
3. Insert the material into the funnel
feeder (7) until you see the
shredded material comes out and
falls into the collector box (16).
4. The designed system between
blade (23) and pressure plate
(24) will draw the material in
automatically. If failed, you can
use the pusher (13) to push the
material down along the funnel
feeder(7).
5. Empty the collector box (16)
when it is about 3/4 full. (See
"emptying the collector box".)
Freeing up a jam
Overload protection switch (11)
motivated
1. Press the function switch (8) to
return to neutral position.
2. After 1-2 minutes, press down the
overload protection switch (11) to
repower the machine.
3. Press the function switch (8)
upwards to allow the blade
rotate anti-clockwise to return the
material.
4. Press and hold the "ON" switch (9)
to start the machine to return the
jammed material.
5. Switch the shredder ON and OFF
(see" switching the shredder on
and off ) to check if the jam is
fixed.
6. If jam is fixed, switch the shredder
ON (see" switching the shredder
on and off ) to continue shredding
material.
7. If jam is not fixed, repeat above
steps. If still fail to fix, open the
blade cover (22) to clean
the jammed material,
a. Unplug the power supply
b. Loosen the four blade cover
screws (21) by enclosed Allen key
c. Pull to remove the blade cover
(22)
d. Clean the jammed material
from the cylinder blade (23) and
pressure plate (24).
D
F
D
F
A
E
109


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Florabest FLH 2800 B2 - IAN 302335 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Florabest FLH 2800 B2 - IAN 302335 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info