733461
107
Zoom out
Zoom in
Previous page
1/117
Next page
GB IE NI
106
Installation manual
Unpacking
Carefully unpack the garden shredder box
and check that it is complete. Dispose of the
packaging material correctly.
1. Remove the shredder from the
packaging.
2. Pull the collector box (16) out of the
chassis (15) and take out the shredder
unit (14) and accessories.
3. Check the scope of delivery.
Assembling the shredder
(1) Insert the wheel shaft (20) into
the chassis (15) and put the inner
washers (17) on both sides.
(2) Assemble the two wheels (2) on
the wheel shaft (1), fix its by outer
washers (18) and cotter pins (19)
(3) Clip in the wheel covers ( 20) into
the wheels (2) with a audible clik.
(4) Fix the shredder unit (14) onto
the chassis (15) with the four self-
tapping screws enclosed and
philips screwdriver (not provided).
(5) To insert the collector box (16),
the safety switch (3) must be
unlocked, i.e. in the “OFF”
position. Push the collector box
(16) into the chassis (15), the
collector box (16) can be pushed
in only in one direction.
(6) Lock the collector box (16) by
pulling the safety switch (3) to the
ON position.
Power-On indicator
The Power-On indicator (12) will light when
all three following conditions are met:
1. Collector box (16) and safety switch (3)
are in proper position
2. The device is connected to the mains
supply
3. The overload protection has not been
triggered. (See respective section.)
The device will not operate while the Power-
On indicator (12) is off.
Operation
Start-up
Before starting the shredder, make sure that
the shredder unit (14) is firmly attached to
the chassis (15) and the collector box (16)
and safety switch (3) are in their proper
positions.
The shredder cannot be switched
on before the collector box (16) and
safety switch (3) are in their proper
positions.
Switching the shredder on and
off
Make sure that the mains power
voltage agrees with the type plate
on the shredder.
1. Connect the extension cable to
the socket (5). Check that the
Power-On indicator (12) turns on.
2. Check that the funnel feeder (7) is
empty.
3. To switch on in continuous mode
for shredding, press the function
switch (8) downwards. Then,
press the "ON" switch (9) to start
shredding material. To switch
off, press the "OFF" switch (10).
Always move the function switch
(8) back into the middle neutral
position.
D
B
C
E
107


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Florabest FLH 2800 B2 - IAN 302335 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Florabest FLH 2800 B2 - IAN 302335 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info