733461
108
Zoom out
Zoom in
Previous page
1/117
Next page
GB IE NI
107
4. To start returning material, press
the function switch (8) upwards.
Then, press and hold the "ON"
switch (9) to start the motor.
Releasing the "ON" switch will
turn off the machine.
Emptying the collector box
Do not leave it until too late to empty
the collector box (16). Remember
that the collector box fills unevenly
under the ejector opening.
1. Switch the shredder off. (see"
switching the shredder on and
off")
2. Unlock the collector box (16) by
placing the safety switch (3) in
the OFF position. (see Fig. E)
3. Remove the collector box (16)
from the chassis (15) and empty
it.
4. Make sure that the area around
the safety switch ( 3) is free of
wood chippings before you
reattach the collector box (16).
5. Reattach the collector box (16 )
and place the safety switch (3) in
the ON position.
Overload protection
In the event of overload, e.g. due to
branches that are too thick, the equipment
automatically switches off.
The overload protection switch (11) is
motivated and the Power-On indicator (12)
turns off which means power off.
Restart prevention
After switching off automatically as a result
of overload, the equipment will not restart
automatically.
After 1 - 2 minutes, to press the Overload
protection switch(11 ) to repower the
mahcine.
The Power-On indicator (12) turns red
which means power on.
Working methods
General working instructions
Keep enough distance to the
shredder since long branches
can be spun off while being
drawn into the shredder.
Wear ear and eye protection
Wear hand protection
For safety reasons, the shredder will not
operate without a correctly attached
collector box (16).
Keep hold of branches while feeding
them into the shredder until they are
automatically drawn in.
Be aware of the possible intake speed
of the cutter and do not overload the
equipment.
Do not allow shredded material to
accumulate near the ejection area. This
may otherwise hinder proper ejection
and force the material back up through
the funnel feeder.
E
108


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Florabest FLH 2800 B2 - IAN 302335 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Florabest FLH 2800 B2 - IAN 302335 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info