783807
9
Zoom out
Zoom in
Previous page
1/82
Next page
9
GB IE
lar, do not work with the tool if guards
or protection ttings are damaged or
missing.
Do not overload the tool. Only work
in the performance range stated. Do
not use tools that do not have sufcient
power for heavy jobs. Do not use the
tool for any use other than that intend-
ed by the manufacturer.
Avoid damage to the tool. Do not ap-
ply extra weight and do not drag the
tool over hard surfaces such as tiles or
steps.
Stopping work:
Warning! The tines will continue
to turn for a few seconds after you
switch the tool off. Wait until they
have stopped moving – injury haz-
ard!
Do not lift or transport the tool while
the motor is running. Turn the tool off
and wait for the tines to stop moving,
then disconnect the tool from the mains
before changing the area you are
working on.
Never leave the tool unattended where
you were using it.
Switch the tool off, wait for the tines to
stop moving and disconnect the tool
from the mains under the following cir-
cumstances:
- Always before leaving the tool.
- Before removing remnants of soil
and plants.
- When the tool is not in use.
- Before you conduct maintenance or
cleaning work on the tool.
- If the mains cable is damaged or
caught up.
- If the tool collides with an obstacle
or starts to vibrate in an unusual
manner. In this case, examine the tool
for damage, and have it repaired if
necessary.
Use the tool away from ammable uids
or gases. Failure to do so may result in
re or explosion.
Maintenance and storage:
Make sure that all nuts, bolts and
screws are tight and that the tool is in
safe working order.
Do not attempt to repair the tool your-
self unless you are qualied to do so.
Return the tool to our service centre to
carry out any work not listed in the user
manual.
Keep the tool in a dry place out of chil-
dren’s reach.
Be careful in handling the tool. Keep
the tines sharp and clean to improve its
working safety and effectiveness.
Follow the maintenance regulations.
Electrical safety:
Warning! Do not use the tool if the
mains or extension cable is dam-
aged – danger of electrical shock.
Keep the mains cable away from the
tines. Always trail the mains cable be-
hind you or the person operating the
tool. If the cable becomes damaged
during use, immediately disconnect it
from the mains.
Never touch the mains cable before un-
plugging it from the mains.
Make sure that the mains voltage match-
es the data on the tool’s rating label.
Avoid skin contact with earthed objects
such as metal fences and posts.
Make sure that the connector on the
extension cable is protected from splash
water, and is made of rubber or has a
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Florabest FGH 710 A1 - IAN 102836 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Florabest FGH 710 A1 - IAN 102836 in the language / languages: English, German, Dutch, French, Swedish, Finnish as an attachment in your email.

The manual is 2.03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info