783807
8
Zoom out
Zoom in
Previous page
1/82
Next page
8
GB IE
their property.
Familiarise yourself with handling the
tool and pay attention to all possible
dangers that may be overheard while
working with the tool.
Check the terrain on which you will
be using the tool, and remove stones,
sticks, wires or other foreign objects
that may be caught up and spun off.
Wear proper working clothes, such as
rm footwear with non-slip soles and
strong long trousers. Do not use the
tool barefoot or wearing open-toed
sandals.
Use personal protective equipment.
Always wear eye protection. Protective
equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing pro-
tection used for appropriate conditions
will reduce personal injuries.
To prevent injury from the tines, only
switch the tool on in its working posi-
tion.
Examine the tool beforehand every
time you use it. Do not use the tool
when the safety components (such as
the power safety catch or guard), cut-
ting parts or bolts are missing, worn
or damaged. In particular, check the
mains cable and dead-man lever for
damage.
Only replace damaged bolts or tines in
complete sets to prevent imbalance.
Only use replacement and accessory
parts delivered and recommended by
the manufacturer. Using foreign parts
will immediately lead to loss of guaran-
tee.
Working with the tool:
Keep your hands and feet away
from the tines while working, espe-
cially when starting up the tool – in-
jury hazard!
Observe any noise-prevention regula-
tions and local by-laws.
Do not use the tool to chop up stones
or till lawn soil, as such use may dam-
age the tool.
Do not use the tool in rain, foul weath-
er or damp surroundings (such as near
garden ponds or swimming pools).
Only use in daylight or good lighting
conditions.
Be sensible. Do not use the tool if you
are tired or easily distracted, or after
the use of alcohol or medicines. Take a
break as soon as you need one.
Make sure that you are standing rmly
when using the tool, especially on
slopes. If working on a slope, work
along the slope, not upwards or down-
wards. Be particularly careful when
changing direction on the slope. Do
not use the tool on excessively steep
slopes.
If there is any danger of slipping on
sloped ground, have a second person
secure the tool with a rod or cable.
The second person should stand up the
slope at a safe distance from the tool.
Always hold the tool securely in both
hands while working with it.
Make sure that the grips are dry and
clean. Be careful while moving back-
wards – danger of tripping over!
Take particular care when turning or
raising the machine.
If the chopping knife is blocked by a
foreign body, switch off the equipment
and disconnect at the plug. Remove
the foreign body (e.g. root) before re-
starting the equipment.
Do not use the tool if it is damaged,
incomplete or altered without the ap-
proval of the manufacturer. In particu-
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Florabest FGH 710 A1 - IAN 102836 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Florabest FGH 710 A1 - IAN 102836 in the language / languages: English, German, Dutch, French, Swedish, Finnish as an attachment in your email.

The manual is 2.03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info