Manual Florabest FBS 43 A1 (page 64 of 70) (German, Dutch, French)

539572

Zoom out

Zoom in

1/70

- 66 -

Caution! Do not use the equipment to remove

objects from footpaths, etc.

The petrol scythe is a powerful tool and can cata-

pult small stones and other objects a distance of

15 meters or more, causing injuries and damage

to cars, houses and windows.

Sawing

The equipment is not suitable for sawing.

Jamming

If the cutting tool jams as a result of attempting

to cut vegetation that is too dense, switch off the

engine immediately. Remove the grass and scrub

from the equipment before you restart it.

Preventing recoil

When you work with the blade, there is a risk of

recoil if it strikes solid objects (tree trunks, bran-

ches, tree stumps, stones or the like). This will

throw the equipment backwards in the direction

opposite to the rotation of the cutting tool. This can

cause you to lose control of the equipment. Do not

use the blade near fences, metal posts, boundary

stones or foundations. For cutting slender wood

growth, position the equipment as shown in Fig. 9f

in order to prevent recoil.

8. Maintenance and ordering

of spare parts

Always switch off the equipment and pull out the

spark boot plug (36) before carrying out any

maintenance work.

8.1 Replacing the line spool/cutting line

1. Dismantle the line spool (13) as described in

section 6.1.6. Press the spool together (Fig.

12a) and remove one half of the housing (Fig.

12b).

2. Take the spool plate (K) out of the line spool

housing (Fig. 12c).

3. Remove any remaining cutting line.

4. Place the new cutting line in the center and

hang the loop which has formed into the re-

cess in the spool splitter. (Fig. 12d)

5. Wind up the line counter-clockwise and under

tension. The spool splitter will separate the

two halves of the line. (Fig. 12e)

6. Hook the last 15 cm of the two ends of the

line onto the opposite lying line holders of the

spool plate. (Fig. 12f)

7. Thread the two ends of the line through the

metal eyelets in the line spool housing (Fig.

12c).

8. Press the spool plate into the line spool

housing (Fig. 12b).

9. Pull the two line ends sharply to release them

from the line holders.

10. Join the housing parts together again.

11. Cut the excess line to a length of around 13

cm. This will reduce the load on the engine

when starting and warming up.

12. Reﬁ t the line spool (see section 6.1.6). If you

are replacing the complete line spool, skip

points 3-6.

8.2 Maintenance of the air ﬁ lter

Soiled air ﬁ lters reduce the engine output by sup-

plying too little air to the carburetor.

Regular checks are therefore essential.

The air ﬁ lter (35) should be checked after every

25 hours of use and cleaned if necessary. If the

air contains a lot of dust, the air ﬁ lter should be

checked more frequently.

1. Remove the cover from the air ﬁ lter housing

(Fig. 10a / Item 8)

2. Remove the air ﬁ lter (Fig. 10b/10c)

3. Clean the air ﬁ lter by tapping it or blowing it

out (with compressed air).

4. Assemble in reverse order.

Important: Never clean the air ﬁ lter with petrol

or inﬂ ammable solvents.

Anleitung_3401991_LB2.indb 66Anleitung_3401991_LB2.indb 66 24.02.12 14:0924.02.12 14:09

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Florabest FBS 43 A1 in the language / languages: German, Dutch, French as an attachment in your email.

The manual is 3,85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Florabest FBS 43 A1 Manual

Product: