Manual Florabest FBS 43 A1 (page 66 of 70) (German, Dutch, French)

539572

Zoom out

Zoom in

1/70

- 68 -

9. Storage and transport

9.1 Storage

Important: Never put the equipment into sto-

rage for longer than 30 days without carrying out

the following steps.

Storing the equipment

If you intend to store the equipment for longer

than 30 days, it must be prepared accordingly.

Otherwise the fuel still remaining in the carburetor

will evaporate and leave a rubbery sediment.

This can cause problems when starting up the

equipment and may require expensive repairs.

1. Slowly remove the fuel tank cap to release

any pressure that may have formed in the

tank. Carefully empty the tank (6).

2. To remove the fuel from the carburetor, start

the engine and let it run until the equipment

stops.

3. Leave the engine to cool (approx. 5 minutes).

4. Remove the spark plug (see 8.3).

5. Add one teaspoon of 2-stroke engine oil into

the combustion chamber. Slowly pull the star-

ter cord several times to apply a layer of oil

to all internal components. Fit the spark plug

again.

Note: Store the equipment in a dry place and

far away from possible ignition sources such as

an oven, a gas-ﬁ red hot water boiler, a gas-ﬁ red

dryer, etc.

Putting the equipment back into opera-

tion

1. Remove the spark plug (see 8.3).

2. Quickly tug on the starter line to remove ex-

cess oil from the combustion chamber.

3. Clean the spark plug and check that the elec-

trode gap is correct, or insert a new spark

plug with the correct electrode gap.

4. Prepare the equipment for operation.

5. Fill the tank with the relevant mixture of fuel

and oil. See the section “Fuel and oil”.

9.2 Transport

To transport the equipment, empty the petrol tank

as described in the section “Storage”. Clean

coarse dirt off the equipment with a brush or hand

brush. Dismantle the steady grip and the long

hande as described in section 6.1.1 and 6.1.2.

10. Cleaning

Always switch off the equipment and pull out the

spark boot plug before carrying out any cleaning

work.

•

The equipment should be cleaned thoroughly

every time after it has been used. This applies

particularly to the cutting tool and the guard

hoods.

•

Keep the air vents and the motor housing free

of dirt and dust as far as possible. Wipe the

equipment with a clean cloth or blow it down

with compressed air at low pressure.

•

It is easiest to remove dirt and grass immedia-

tely after mowing.

•

Clean the equipment regularly with a damp

cloth and some soft soap. Do not use cleaning

agents or solvents; these may be aggressive

to the plastic parts in the equipment. Ensure

that no water can get into the interior of the

equipment.

11. Disposal and recycling

The equipment is supplied in packaging to prevent

it from being damaged in transit. The raw materi-

als in this packaging can be reused or recycled.

The equipment and its accessories are made of

various types of material, such as metal and plas-

tic. Defective components must be disposed of as

special waste. Fuel and oil must be disposed of

only at special refuse collection centers. Ask your

dealer or your local council.

Anleitung_3401991_LB2.indb 68Anleitung_3401991_LB2.indb 68 24.02.12 14:0924.02.12 14:09

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Florabest FBS 43 A1 in the language / languages: German, Dutch, French as an attachment in your email.

The manual is 3,85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Florabest FBS 43 A1 Manual

Product: