Manual Florabest FBKS 4014 (page 7 of 20) (English)

531719

Zoom out

Zoom in

1/20

KICKBACK SAFETY FEATURES

WARNING: The f ollowing features are

included onyour saw to help reduce the hazard

of kickback; however , such features will not to-

tally eliminate this dangerous reaction. A s a

chain saw user , do not rely only on safety de-

vices. Y ou must follow all safety precautions,

instructions, and maintenance in this manual to

help avoid kickback and other forces which

can result in serious injury.

S Reduced--Kickback Guide Bar , designed

wit h a sm all r a d ius tip whichre d u ce s the size

of t he kickback danger zone on the bar tip. A

Reduced--Kickback Guide Bar has been

demonstrated to significantly reduce the

number and seriousness of kickbacks.

Small Radius Tip

Reduced Kickback

Symmetrical

Guide Bar

Symmetrical Guide Bar

Large Radius Tip

S Low--Kickback Chain, designed with a

contoured depth gauge and guard link

which deflect k ickback force and allow

wood to gradually ride into the cutter.

Low-Kickback Chain

Contoured Depth Gauge

Elongated Guard Link

Deflects Kickback

Force And Allows

Wood To Gradually

Ride Into Cutter

S Handguard, designed to reduce t he

chance of your left hand contacting the

chain if your handslips of fthe front handle-

bar.

S Position of front and rear handlebars, de-

signed with distance between handles and

“in-line” with each other. The spread and

“in-line” position of the hands provided by

this design work together to give balance

and resistance in controlling the pivot of

the saw back toward the operator if kick-

back occurs.

WARNING: DO NOT RELY UPON

ANY OF THE DEVICES BUILTINTO YOUR

SAW. YOU SHOULD USE THE SAW

PROPERLY AND CAREFULLY TO AVOID

KICKBACK. Reduced--kickback guide bar s

and low--kickback saw chains reduce the

chance and magnitude of kickback and are

recommended. Your saw has a lowkickback

chain and bar as original equipment. Re-

pairs on a chain brake should be made by an

authorized servicing dealer. Take your u nitto

the place of purchase if purchased from a

servicing dealer, or to the nearest authorized

master service dealer.

S Tip contact in some cases may cause a

lightning fast reverse REACTION, kicking

the guide bar up and back toward theoper-

ator.

S Pinching the saw chain alongthe top ofthe

guide bar may push the guide bar rapidly

back toward the operator.

S Either ofthese reactions may cause youto

lose control of the saw which could result

in serious injury. Do not rely exclusively

upon the safety devices builtinto your saw.

ASSEMBLY

Protective gloves (not provided) should be

worn during a ssembly.

A TT A CH IN G THE BUMPER SPIKE

The bumper spike may be used as a pivot

when making a cut.

1. Loosen and remove the bar nuts and the

clutch cover from the saw.

2. Attach the bumper spike with the two

screws as illustrated.

ATTACHING THE BAR & CHAIN

(If not already attached)

WARNING: Recheck each assem-

bly step ifthe saw is received assembled.Al-

ways wear gloves when handling the chain.

The chain is sharp and can cut you even

when it is not moving!

1. Loosen and remove the bar nuts and the

clutch cover from the saw.

2. Remove the plastic shipping spacer (if

present).

Clutch cover

Bar nuts

Chain adjustment tool

(Bar Tool)

Location of

shipping

spacer

Looking for Spring attached to handle of chainsaw and attached down where you put the chain oil in. Submitted on 10-4-2020 at 19:58
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Florabest FBKS 4014 in the language / languages: English as an attachment in your email.

The manual is 0,47 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Florabest FBKS 4014

Florabest FBKS 4014 User Manual - Dutch - 23 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Florabest FBKS 4014 Manual

Product: