Manual Florabest FBKS 4014 (page 6 of 20) (English)

531719

Zoom out

Zoom in

1/20

S Pinch-Kickback can occur when the the

wood closes in and pinches the moving

saw chain in the cut along the top of the

guide bar and the saw chain is suddenly

stopped. This sudden stopping of the

chain results in a reversal of the chain

force used to cut wood and causes the

saw t omove in the opposite direction ofthe

chain rotation. The saw is driven straight

back toward the operator.

S Pull-In can occur when the moving chain

contacts a foreign object in the w ood inthe

cut along the bottom of the guide bar and

the saw chain is suddenly stopped. This

sudden stopping pulls thesaw forward and

away from the operator and could easily

cause the operator to lose control of the

saw.

Avoid Pinch--Kickback:

S Be extremely aware of situations or ob-

structions that can cause material to pinch

the top of or otherwise stop the chain.

S Do not cut more than one log at a time.

S Do not twist the saw as the bar is with-

drawn from an undercut when bucking.

Avoid Pull--In:

S Always begin cutting with the engine at full

speed and the saw housing against wood.

S Use wedges made of plastic or wood.

Never use me tal to hold the cut open.

Kickback Path

Clear The

Work ing Area

Avoid Obstructions

REDUCETHECHANCEOF

KICKBACK

S Recognize that kickback can happen.

With a basic understanding of kickback,

you can reduce the element of surprise

which contributes to accidents.

S Never let the moving chaincontact anyob-

ject at the tip of t he guide bar.

S Keep the working area free from obstruc-

tions such as othertrees, br anches, rocks,

fences, stumps, etc. Eliminate or avoid

any obstruction that your saw chain could

hit while you are cutting through a particu-

lar log or branch.

S Keep your saw chain sharp and properly

tensioned. A loose or dull chain can in-

crease the chance of kickback occurring.

Follow manufacturer’s chain sharpening

and maintenance instructions. Check ten-

sion at regular intervals with the engine

stopped, never with the engine running.

Make sure thebar clampnuts ar esecurely

tightened after tensioning the chain.

S Begin and continue cutting at full speed. If

the chain is moving at a slower speed, there

is greater chance of kickback occurring.

S Cut one log at a time.

S Use extreme caution when re-entering a

previous cut.

S Do not attempt cuts starting with the tip of

the b ar (plunge cuts).

S Watch for shifting logs or other forces that

could close a cut and pinch or fall into chain.

S Use the Reduced--Kickback Guide Bar and

Low--Kickback Chain specified for your saw.

MAINTAIN CONTROL

Never reverse

hand positions

Stand t o the left of

the saw

Thumb on underside of

handlebar

Elbow locked

S Keep a good, firm gripon the saw with both

hands when the engine is running and

don’t letgo. A firm grip willhelp you reduce

kickback and maintain control of the saw.

Keep the fingers of your left hand encir-

cling and your left thumb under the front

handlebar. Keep your r ight hand complete-

ly around the rear handle whether your are

right handed or left handed. Keep your left

arm straight with the elbow locked.

S Position your left hand on the front handle-

bar so it is in a straight line with your right

hand on the rear handle when making

bucking cuts. Never reverse right and left

hand positions for any type of cutting.

S Standwith your weight evenly balancedon

both feet.

S Stand slightly to the left side of the saw to

keep your body from being in a direct line

with the cutting chain.

S Do not overreach. You could be drawn or

thrown off balance and lose control of the

saw.

S Do not cut above shoulder height. It is diffi-

cult to maintain control of saw above

shoulder height.

Looking for Spring attached to handle of chainsaw and attached down where you put the chain oil in. Submitted on 10-4-2020 at 19:58
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Florabest FBKS 4014 in the language / languages: English as an attachment in your email.

The manual is 0,47 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Florabest FBKS 4014

Florabest FBKS 4014 User Manual - Dutch - 23 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Florabest FBKS 4014 Manual

Product: