Manual Florabest FBK 4 C2 - IAN 296309 (page 15 of 42) (English)

679143

Zoom out

Zoom in

1/42

FBK 4 C2

■ 10

│

GB│IE│NI

Before use

CAUTION!

■ Always wear non-slip footwear and appropriate safety clothing

such as protective gloves, a hard hat, a protective mask and safety

goggles as well as hearing protection.

■ Check the area in which the appliance is to be used and remove any

objects that may be caught and slung away.

■ Before use and after dropping or other impacts, always visually in-

spect the appliance to check whether the cutting tool, mounting bolts

and the entire cutting unit are damaged. Worn or damaged cutting

tools and mounting bolts must be replaced.

■ Always carry out a visual inspection before use to check whether the

cutting tools are worn or damaged. To prevent imbalance, worn or

damaged cutting tools and mounting bolts should be replaced only

as complete sets.

Attaching the round handle

♦ Start by ﬁtting the rubber ring

on the boom .

♦ Attach the barrier bar

onto the rubber ring

from below, as

shown in the diagram.

♦ The pin

of the barrier bar must be pushed into one of the two

holes on the boom

to lock into place.

♦ Push the round handle onto the rubber ring

provided on the

boom

♦ Insert the 4 mounting bolts

from above through the round handle

and ﬁx them onto the barrier bar with the 4 nuts.

♦ Tighten the screws

Assembling the quick release mechanism

♦ Hook in the carabiner and secure it with the red strap on the quick

release mechanism (see ﬁgures). Pull on the red strap if you have to

put down the appliance quickly.

Fixing/attaching the carrying harness

♦ Hook the carrying harness



into the carrying lug .

♦ Adjust the length of the carrying harness



to your size so that the

carrying lug

is at hip height when the strap is hooked in place.

Assembling the hedge trimmer

♦ Start by undoing the screw grip on the boom of the engine unit.

♦

Push the pin on the front boom of the

hedge trimmer into the groove on the engine

unit boom

as far as the stop. Once it is

correctly inserted, the red line must match

up with the one on the engine unit boom.

♦ Tighten the screw grip

NOTE

► Assembly of the pole pruner/strimmer/3-section cutting blade/exten-

sion attachment is carried out in the same order.

Removing the hedge trimmer

♦ Undo the screw grip and pull the front boom of the hedge trimmer

out of the engine unit boom

NOTE

► Removal of the pole pruner/strimmer/3-section cutting blade/extension

attachment is carried out in the same order.

Swivelling the hedge trimmer

♦ Release the lock/release .

♦ Press the control lever

and swivel the hedge trimmer into the desired

position.

♦ Allow the control lever

to click into the recess in the base plate

(hedge trimmer)

Mounting the saw chain and blade

WARNING!

► Wear protective gloves! There is a danger of injury from the sharp

cutting teeth!

NOTE

► Pay close attention to the running direction of the saw chain

the blade

and at the base plate (hedge trimmer) .

► Depending on wear, the blade can be turned.

♦ Undo the nut

using the open-ended spanner



♦ Remove the sprocket cover

♦ Lay the saw chain

over the blade starting at the tip.

♦ Now ﬁt the blade

and saw chain .

♦ Lay the guide rail

over the blade guide , while inserting the chain

tensioner pin

in the blade hole . At the same time, lay the saw

chain

over the chain sprocket .

♦ Now you can tighten the saw chain

(see section "Tightening and

checking the saw chain").

♦ Replace the sprocket cover

and tighten the nut gently.

Removing the saw chain

♦ You may have to loosen the saw chain to remove the blade

and the saw chain

(see section "Tightening and checking the saw

chain"). Follow these instructions in reverse order.

Hvor kan man købe reservedele? Jeg mangler en fjeder der sidder i huset hvor starts snoren sidder Submitted on 24-3-2021 at 14:32
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Florabest FBK 4 C2 - IAN 296309 in the language / languages: English as an attachment in your email.

The manual is 2,95 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Florabest FBK 4 C2 - IAN 296309

Florabest FBK 4 C2 - IAN 296309 User Manual - German, Dutch, Danish, French - 78 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Florabest FBK 4 C2 - IAN 296309 Manual

Product: